Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - hightech

Pages: 1 2 [3] 4 5 ... 22
51
UPDATED FOR OCTOBER 2016

NB: GET 10K DISCOUNT IF YOU PAY BEFORE 7TH OCT 2016


High-Tech IT and Engineering is now the official partner of SMEC LAB a division of SMEC AUTOMATION INDIA (ISO 9001:2008 Certified) on Instrumentation and Control Engineering training in Nigeria.
For your world class hands on skill Instrumentation and Control Engineering training with internationally recognized certificate call on us now.
BENEFIT OF TRAINING WITH US
(1) Training s are purely hands on skill as outlined in the course content
(2) Our certificate is internationally recognized
(3) We partner with some of the industrial major player like Schneider Electric etc
(4) Free job consultancy and placement
(5) Free accommodation for our international courses
(6) 10% discount on our international course
(7) We help you process your visa and flight on request.




Date: 10TH - 28TH OCTOBER 2016
Time: 1pm - 4pm & 5pm - 8pm Respectively daily
EXAMINATION and CERTIFICATION

COST: 65,000 (COST COVERS MATERIALS,TRAINING AND CERTIFICATE)
NB: GET 10K DISCOUNT IF YOU PAY BEFORE 7TH OCT 2016

NB: COMFORTABLE ACCOMMODATION COULD BE ARRANGED AT 3,000 PER DAY FOR CLIENTS


TEL: 07035816455
BBM: 7E36F937
EMAIL: info@hightechng.com
www.hightechng.com

YOU WILL LEARN
Instrumentation and Control
? Defining what to measure, why a parameter measure and how to measure.

? Determining and using the many control strategies, equipment and computer systems common to an oil and gas facility.

? Identifying equipment and instrument characteristics and using appropriate instrumentation and controls.

? Defining and integrating components into systems that monitor and locally control the process (and related equipment), safety systems, and the communications and remote control systems use.

ABOUT THE COURSE
This course provides an overview of process systems instrumentation, and control strategies and configurations. The focus is on application and integration into the process and control of upstream and midstream oil and gas facilities. The material of the course is applicable to field production facilities, pipelines, gas plants, and offshore systems.
? Process systems operations and the key characteristics, and measurement needs, as well as

? Techniques to measure and control.

? Control modes and their applications, communications requirements, and the operator and

? Computer controller interface.

? Interrelationships between process, equipment, instruments and controls.

? Field (facility) control and monitoring systems such as pressure and level indicators and controllers.

? Field (facility) safety monitoring and response systems including SIS, HIPPS and emergency shutdown valves.

? System-wide considerations including communications, local control, remote control, and

? Data management and use.


COURSE CONTENT

GENERAL MODULE 1:
Safety in Oil and Gas
Subsurface oil and gas activities Overview
Oil and Gas definitions from origin -modern day Drilling technology (video)
Reservoir analysis and in-put to process engineering (video)

GENERAL MODULE 2:
Overview of typical Onshore and Offshore oil and Gas processing facility - Onshore Oil processing system units
Wellhead
Flow lines
Inlet manifold
Separators ? detailed operating system demonstration ? (video)
Surge vessel
LACT unit
Export pumps



- Overview of Crude Oil tank farm
- Oily water treatment units


GENERAL MODULE 3:
Offshore Oil and Gas facilities Overview
INSTRUMENT MODULES:
Understanding Instrumentation, control and automation engineering
? Understanding Conceptual Engineering, Front End Engineering Design, Detailed Engineering Design and Process deliverable sessions for optimal design

? In-country Oil & Gas Regulations, International Codes & Standards, Specifications, Recommended Practices, Publications, Bulletins & Technical Reports

? Introduction to instrument components and piping related components

? Valve types and function (manual and controlled)

? Identifying general process and safety device Symbols

? Understanding ICA (Instrumentation /Controls and automation) interface with Process engineering and Mechanical Piping o Understanding a PI& using the Legend Sheet

? Typical oil industry pipe sizes
? Pressure Rating
? What is valve tagging?
? Flow direction symbols
? Understanding Operating and design P, V, T data
Site Visit Activities
? Understanding and capturing requirement from a typical Project Scope prior to site visit
? How to prepare a Check List and Site Visit Report

Generating IC&A and Process Interface drawings -Generating SAFE chart (Practice exercise)
? Generating a Block diagram e.g. SDV Panel Block Diagram (Practice exercise)

? Generating Tie-in Schematics e.g. Main Control Panel/Gas Lift Panel

? Generating IC&A and Piping interface drawings
? Generating Level Indicator Hook-up Details
? Generating Flow meter Installation Details
? Generating Pressure Indicator Hook-up details
? Generating Pressure Temperature Indicator Hook-up
? Generating Pressure Level Switch Installation Details
? Generating Pressure LIC/LV Installation Details
? Generating Pressure PC/PCV Installation Details
? Generating Pressure PSH/PSL/PI Installation Details
? Generating Pressure Shutdown Valve Installation Details
? Generating Pressure Chart Recorder - Mounting Detail

PLC & IL
PLC
? Understanding the actual meaning of PLC
? Importance of PLC in IC&A design works for oil & gas sector
? Logics as regards to designs for control panels and other related automated cubicles
? Help out in the programming of PLCs and know whatever information required by the manufacturers
? Understand various programming languages of the PLC in line with IEC- 61131-3
? Knowing what input and output devices and other PLC/PAC Equipment
? Knowing how the PLC communication concept, e.g the Ethernet, master slave networks, RTU/DCS/HMI interfaces, Drivers, etc.
? Understanding Human-machine interface functions


Generating Instrument lists (IL)
? Definition of Instrument list
? To understand the purpose of having an instrument list
? To effectively read and interpret the Instrument list
? To know the composition of Instrument list

Overview of Instrument unit installation

? To understand the use of installation details in instrumentation
? To understand and extract the materials for construction
? To effectively read and recognize the various valves, tubing and cablings
? Involved in the various installation details
? To understand how to extract material take off or Bill of materials from
? To read and analyze various Installation details



Field Instrumentation
? Understanding instrument unit Location Plan
? To understand the use of location plans or layouts in instrumentation
? To understand and read location plans for detection of equipment on Plans
? Generating instrument Loop diagrams
? To understand the use of Loop Diagrams in instrumentation
? To generate loop Diagrams from the P&IDs
? To effectively read and recognize the various valves, tubing?s and cablings Involved in the Loop Diagrams
? To understand every connections or interrelationships involved in loop Diagrams
? To read and analyze various Loop Diagrams.
? Generating instrument tubing and Tray layout e.g. using Equipment layout drawing

DCS Initiative
? Understanding the DCS initiatives
? Introduction to DCS
? Evolution from DCS to Smaller hybrid systems, large Enterprise-wide systems, and so called open control Systems
? Comparing DCS to traditional single-loop, central computer, PLC, PAC, PC, and SCADA architectures, along with fiber-optic, wireless, multiple field buses, Safety systems and security issues.

Fundamentals of SIF Workshop in safe oil and Gas Operations -SIL Classification
? Introduction to Safety Analysis and System Design
? Protection Concepts and Safety Analysis

Date: 10TH - 28TH OCTOBER 2016
Time: 1pm - 4pm & 5pm - 8pm Respectively daily
EXAMINATION and CERTIFICATION

COST: 65,000 (COST COVERS MATERIALS,TRAINING AND CERTIFICATE)
NB: GET 10K DISCOUNT IF YOU PAY BEFORE 7TH OCT 2016



NB: COMFORTABLE ACCOMMODATION COULD BE ARRANGED AT 3,000 PER DAY FOR CLIENTS

TEL: 07035816455
BBM: 7E36F937
EMAIL: info@hightechng.com
www.hightechng.com

52
MONDAY JOBS POSTING / Instrumentation and Control Engineering
« on: September 26, 2016, 09:53:38 AM »
UPDATED FOR OCTOBER 2016

NB: GET 10K DISCOUNT IF YOU PAY BEFORE 7TH OCT 2016


High-Tech IT and Engineering is now the official partner of SMEC LAB a division of SMEC AUTOMATION INDIA (ISO 9001:2008 Certified) on Instrumentation and Control Engineering training in Nigeria.
For your world class hands on skill Instrumentation and Control Engineering training with internationally recognized certificate call on us now.
BENEFIT OF TRAINING WITH US
(1) Training s are purely hands on skill as outlined in the course content
(2) Our certificate is internationally recognized
(3) We partner with some of the industrial major player like Schneider Electric etc
(4) Free job consultancy and placement
(5) Free accommodation for our international courses
(6) 10% discount on our international course
(7) We help you process your visa and flight on request.




Date: 10TH - 28TH OCTOBER 2016
Time: 1pm - 4pm & 5pm - 8pm Respectively daily
EXAMINATION and CERTIFICATION

COST: 65,000 (COST COVERS MATERIALS,TRAINING AND CERTIFICATE)
NB: GET 10K DISCOUNT IF YOU PAY BEFORE 7TH OCT 2016

NB: COMFORTABLE ACCOMMODATION COULD BE ARRANGED AT 3,000 PER DAY FOR CLIENTS


TEL: 07035816455
BBM: 7E36F937
EMAIL: info@hightechng.com
www.hightechng.com

YOU WILL LEARN
Instrumentation and Control
? Defining what to measure, why a parameter measure and how to measure.

? Determining and using the many control strategies, equipment and computer systems common to an oil and gas facility.

? Identifying equipment and instrument characteristics and using appropriate instrumentation and controls.

? Defining and integrating components into systems that monitor and locally control the process (and related equipment), safety systems, and the communications and remote control systems use.

ABOUT THE COURSE
This course provides an overview of process systems instrumentation, and control strategies and configurations. The focus is on application and integration into the process and control of upstream and midstream oil and gas facilities. The material of the course is applicable to field production facilities, pipelines, gas plants, and offshore systems.
? Process systems operations and the key characteristics, and measurement needs, as well as

? Techniques to measure and control.

? Control modes and their applications, communications requirements, and the operator and

? Computer controller interface.

? Interrelationships between process, equipment, instruments and controls.

? Field (facility) control and monitoring systems such as pressure and level indicators and controllers.

? Field (facility) safety monitoring and response systems including SIS, HIPPS and emergency shutdown valves.

? System-wide considerations including communications, local control, remote control, and

? Data management and use.


COURSE CONTENT

GENERAL MODULE 1:
Safety in Oil and Gas
Subsurface oil and gas activities Overview
Oil and Gas definitions from origin -modern day Drilling technology (video)
Reservoir analysis and in-put to process engineering (video)

GENERAL MODULE 2:
Overview of typical Onshore and Offshore oil and Gas processing facility - Onshore Oil processing system units
Wellhead
Flow lines
Inlet manifold
Separators ? detailed operating system demonstration ? (video)
Surge vessel
LACT unit
Export pumps



- Overview of Crude Oil tank farm
- Oily water treatment units


GENERAL MODULE 3:
Offshore Oil and Gas facilities Overview
INSTRUMENT MODULES:
Understanding Instrumentation, control and automation engineering
? Understanding Conceptual Engineering, Front End Engineering Design, Detailed Engineering Design and Process deliverable sessions for optimal design

? In-country Oil & Gas Regulations, International Codes & Standards, Specifications, Recommended Practices, Publications, Bulletins & Technical Reports

? Introduction to instrument components and piping related components

? Valve types and function (manual and controlled)

? Identifying general process and safety device Symbols

? Understanding ICA (Instrumentation /Controls and automation) interface with Process engineering and Mechanical Piping o Understanding a PI& using the Legend Sheet

? Typical oil industry pipe sizes
? Pressure Rating
? What is valve tagging?
? Flow direction symbols
? Understanding Operating and design P, V, T data
Site Visit Activities
? Understanding and capturing requirement from a typical Project Scope prior to site visit
? How to prepare a Check List and Site Visit Report

Generating IC&A and Process Interface drawings -Generating SAFE chart (Practice exercise)
? Generating a Block diagram e.g. SDV Panel Block Diagram (Practice exercise)

? Generating Tie-in Schematics e.g. Main Control Panel/Gas Lift Panel

? Generating IC&A and Piping interface drawings
? Generating Level Indicator Hook-up Details
? Generating Flow meter Installation Details
? Generating Pressure Indicator Hook-up details
? Generating Pressure Temperature Indicator Hook-up
? Generating Pressure Level Switch Installation Details
? Generating Pressure LIC/LV Installation Details
? Generating Pressure PC/PCV Installation Details
? Generating Pressure PSH/PSL/PI Installation Details
? Generating Pressure Shutdown Valve Installation Details
? Generating Pressure Chart Recorder - Mounting Detail

PLC & IL
PLC
? Understanding the actual meaning of PLC
? Importance of PLC in IC&A design works for oil & gas sector
? Logics as regards to designs for control panels and other related automated cubicles
? Help out in the programming of PLCs and know whatever information required by the manufacturers
? Understand various programming languages of the PLC in line with IEC- 61131-3
? Knowing what input and output devices and other PLC/PAC Equipment
? Knowing how the PLC communication concept, e.g the Ethernet, master slave networks, RTU/DCS/HMI interfaces, Drivers, etc.
? Understanding Human-machine interface functions


Generating Instrument lists (IL)
? Definition of Instrument list
? To understand the purpose of having an instrument list
? To effectively read and interpret the Instrument list
? To know the composition of Instrument list

Overview of Instrument unit installation

? To understand the use of installation details in instrumentation
? To understand and extract the materials for construction
? To effectively read and recognize the various valves, tubing and cablings
? Involved in the various installation details
? To understand how to extract material take off or Bill of materials from
? To read and analyze various Installation details



Field Instrumentation
? Understanding instrument unit Location Plan
? To understand the use of location plans or layouts in instrumentation
? To understand and read location plans for detection of equipment on Plans
? Generating instrument Loop diagrams
? To understand the use of Loop Diagrams in instrumentation
? To generate loop Diagrams from the P&IDs
? To effectively read and recognize the various valves, tubing?s and cablings Involved in the Loop Diagrams
? To understand every connections or interrelationships involved in loop Diagrams
? To read and analyze various Loop Diagrams.
? Generating instrument tubing and Tray layout e.g. using Equipment layout drawing

DCS Initiative
? Understanding the DCS initiatives
? Introduction to DCS
? Evolution from DCS to Smaller hybrid systems, large Enterprise-wide systems, and so called open control Systems
? Comparing DCS to traditional single-loop, central computer, PLC, PAC, PC, and SCADA architectures, along with fiber-optic, wireless, multiple field buses, Safety systems and security issues.

Fundamentals of SIF Workshop in safe oil and Gas Operations -SIL Classification
? Introduction to Safety Analysis and System Design
? Protection Concepts and Safety Analysis

Date: 10TH - 28TH OCTOBER 2016
Time: 1pm - 4pm & 5pm - 8pm Respectively daily
EXAMINATION and CERTIFICATION

COST: 65,000 (COST COVERS MATERIALS,TRAINING AND CERTIFICATE)
NB: GET 10K DISCOUNT IF YOU PAY BEFORE 7TH OCT 2016



NB: COMFORTABLE ACCOMMODATION COULD BE ARRANGED AT 3,000 PER DAY FOR CLIENTS

TEL: 07035816455
BBM: 7E36F937
EMAIL: info@hightechng.com
www.hightechng.com

53
SATURDAY JOBS / QAQC Management and Engineering
« on: September 23, 2016, 11:00:24 AM »
UPDATED FOR OCTOBER 2016

COURSE OUTLINE

Course description
This course focuses on both the management of product quality and the management of the process quality for creating project deliverables. It provides exposure to the tools, techniques, and metrics used to ensure that sufficient product and process quality is achieved. It includes assignments which allow participants to learn how to plan quality into a project and determine key metrics to manage project and process quality.
Who should attend ?
This course is primarily designed for engineers, project managers and supervisors, quality control and quality assurance personnel and anyone with interest in quality planning, control and supervision. This includes exposure to basic project management techniques such as scope, activity, and resource planning.
What you will achieve


An understanding of the relationship among quality planning, quality assurance, and quality control
An understanding of numerous tools and techniques which can be used to monitor and improve quality
The ability to develop and track key quality metrics to satisfy customer needs
The ability to determine process metrics to maintain quality standards
An understanding of the responsibilities of senior management, the project manager, and project team members to ensure the existence of an adequate quality management process



What you will learn


Roles and Responsibilities of QA / QC Engineer
Project Quality Management Principles
Tools for Project Quality Management
Models for Continuous Quality Improvement of the Project Management Process
Product Quality vs. Process Quality
Introduction to ISO 9001 . ISO 9004 , ISO 14000. ISO 19011
International Codes and Standards
Control of Nonconforming of Items / Products
Preparation of Project Quality Plan
Preparation of Inspection Test Plans ? ITPs
Final QA / QC Documentation




DATE: 10TH - 28TH OCTOBER 2016
DURATION: 2WEEKS
TIME: 11am - 1pm
COST: 40,000 (PROMO COST)

NB: GET 5K DISCOUNT IF YOU PAY BEFORE 7TH OCT 2016


Call: 07035816455 for booking

Location: 14 Woji road rumuogba Port Harcourt

www.hightechng.com or email info@hightechng.com

54
FRIDAY JOBS / QAQC Management and Engineering
« on: September 23, 2016, 11:00:14 AM »
UPDATED FOR OCTOBER 2016

COURSE OUTLINE

Course description
This course focuses on both the management of product quality and the management of the process quality for creating project deliverables. It provides exposure to the tools, techniques, and metrics used to ensure that sufficient product and process quality is achieved. It includes assignments which allow participants to learn how to plan quality into a project and determine key metrics to manage project and process quality.
Who should attend ?
This course is primarily designed for engineers, project managers and supervisors, quality control and quality assurance personnel and anyone with interest in quality planning, control and supervision. This includes exposure to basic project management techniques such as scope, activity, and resource planning.
What you will achieve


An understanding of the relationship among quality planning, quality assurance, and quality control
An understanding of numerous tools and techniques which can be used to monitor and improve quality
The ability to develop and track key quality metrics to satisfy customer needs
The ability to determine process metrics to maintain quality standards
An understanding of the responsibilities of senior management, the project manager, and project team members to ensure the existence of an adequate quality management process



What you will learn


Roles and Responsibilities of QA / QC Engineer
Project Quality Management Principles
Tools for Project Quality Management
Models for Continuous Quality Improvement of the Project Management Process
Product Quality vs. Process Quality
Introduction to ISO 9001 . ISO 9004 , ISO 14000. ISO 19011
International Codes and Standards
Control of Nonconforming of Items / Products
Preparation of Project Quality Plan
Preparation of Inspection Test Plans ? ITPs
Final QA / QC Documentation




DATE: 10TH - 28TH OCTOBER 2016
DURATION: 2WEEKS
TIME: 11am - 1pm
COST: 40,000 (PROMO COST)

NB: GET 5K DISCOUNT IF YOU PAY BEFORE 7TH OCT 2016


Call: 07035816455 for booking

Location: 14 Woji road rumuogba Port Harcourt

www.hightechng.com or email info@hightechng.com

55
SATURDAY JOBS / INDUSTRIAL AUTOMATION AND CONTROL ENGINEERING
« on: September 23, 2016, 10:58:10 AM »
INDUSTRIAL AUTOMATION AND DESIGN SYSTEMS
YOU WILL LEARN
? Defining what to measure, why a parameter measure and how to measure .
? Determining and using the many control strategies, equipment and computer systems common to an oil and gas facility.
? Identifying equipment and instrument characteristics and using appropriate instrumentation and controls.
? Defining and integrating components into systems that monitor and locally control the process
(and related equipment), safety systems, and the communications and remote control systems use.

ABOUT THE COURSE

This course provides an overview of process systems automations, and control strategies and configurations. The focus is on applicatio and integration into the process and control of upstream and midstream oil and gas facilities. The material of the course is applicable to field production facilities, pipelines, gas plants, and offshore systems.
? Process systems operations and the key characteristics, and measurement needs, as well as
? Techniques to measure and control.
? Control modes and their applications, communications requirements, and the operator and Computer controller interface.
? Interrelationships between process, equipment, instruments and controls.
? Field (facility) control and monitoring systems such as pressure and level indicators and controllers.
? Field (facility) safety monitoring and response systems including SIS, HIPPS and emergency shutdown valves.
? System-wide considerations including communications, local control, remote control, and
? Data management and use.

WEEK 1.
COURSE CONTENT FOR AUTOMATION TRAINING.
1. Introduction to Automation
2. Brief History of PLC.
? Need and advantages of PLC.
? PLC Configurations.
? System Block diagram.
? PLC Classifications and types.
3. How PLC Works.
? General Architecture of PLC.
? Hardware details of PLC including front indications, terminals and ports on the modules.
? Brands of PLC to be treated.
? Allen-Bradley (RS 500 Micro-Logix).
? Siemens (S7-300).
? Omron (CPIE)
4. Fundamentals of PLC Programming.
? Programming units and using PC as programming unit, also Communication ports.
? Programming Languages and representation in FBD and LAD.
? Basic components and their symbols.
5. Understanding Relay concept.
? Relay wiring for logical gates.
6. Sensor: Actuator Concept for an associated process.

WEEK 2.
1. Siemens PLC (S7-300)
? Hardware and Software details.
? Front panel controls and communication details for S7-300 PLC.
? Selecting the operating mode for the S7-300 CPU.
? Specifications Capabilities of S7-300 PLC.
? Fixed Slots and Variable addressing for S7-300 PLC.
? Getting familiar with step 7 screens, options and navigation.
? Solving and developing Logic.
? Editing and modifying Ladder Logic Programs.
? Using Timers.
? Counters
? Flasher, using timers.
? Comparison Instructions.
? Mathematical Instructions
? Scaling analog values.
? Uploading and Downloading.
? Solving problems and software practice.
2. Allen-Bradley PLC (RS 500 Micro-Logix).
? Hardware and Software Details.
? Front panel controls and communication details.
? Selecting the operating mode for RS 500.
? Addressing of RS 500.
? Solving and Developing Logics.
? Editing and Modifying Logic Programs.
? Using Timers.
? Counters.
? Integers.
? Memory addressing.
? Float.
? Jump.
? Subroutine.
? Comparison.
? Control Reset (MCR).
? Swap (SWP).
? Uploading and Downloading.
? Solving Problems and Software Practice.
3. Omron PLC (CPIE).
? Hardware and Software details.
? Communication details.
? Selecting the Operating mode for CPIE.
? Addressing of Omron PLC.
? Developing Logics.
? Editing and Modifying Logic diagrams.
? Using Timers
? Counters
? Jump.
? Subroutine.
? Uploading and Downloading.
? Problems Solving and Software Practice.
4. Introduction to SCADA (Wonderware InTouch).
? Introduction to Wonderware InTouch SCADA Software.
? Applications of SCADA Software.
? Features of SCADA (Wonderware InTouch).




DATE:10th - 28th Oct 2016
DURATION: 3WEEKS
TIME: 9AM TO 1PM
COST: 80,000 (ON PROMO)

PAY BEFORE 7TH OCT AND GET 10K DISCOUNT

Venue: 14 Woji road rumuogba Port Harcourt
Website: www. hightechng. com
Phone: 234- 7035816455, 07012321020

56
FRIDAY JOBS / INDUSTRIAL AUTOMATION AND CONTROL ENGINEERING
« on: September 23, 2016, 10:57:53 AM »
INDUSTRIAL AUTOMATION AND DESIGN SYSTEMS
YOU WILL LEARN
? Defining what to measure, why a parameter measure and how to measure .
? Determining and using the many control strategies, equipment and computer systems common to an oil and gas facility.
? Identifying equipment and instrument characteristics and using appropriate instrumentation and controls.
? Defining and integrating components into systems that monitor and locally control the process
(and related equipment), safety systems, and the communications and remote control systems use.

ABOUT THE COURSE

This course provides an overview of process systems automations, and control strategies and configurations. The focus is on applicatio and integration into the process and control of upstream and midstream oil and gas facilities. The material of the course is applicable to field production facilities, pipelines, gas plants, and offshore systems.
? Process systems operations and the key characteristics, and measurement needs, as well as
? Techniques to measure and control.
? Control modes and their applications, communications requirements, and the operator and Computer controller interface.
? Interrelationships between process, equipment, instruments and controls.
? Field (facility) control and monitoring systems such as pressure and level indicators and controllers.
? Field (facility) safety monitoring and response systems including SIS, HIPPS and emergency shutdown valves.
? System-wide considerations including communications, local control, remote control, and
? Data management and use.

WEEK 1.
COURSE CONTENT FOR AUTOMATION TRAINING.
1. Introduction to Automation
2. Brief History of PLC.
? Need and advantages of PLC.
? PLC Configurations.
? System Block diagram.
? PLC Classifications and types.
3. How PLC Works.
? General Architecture of PLC.
? Hardware details of PLC including front indications, terminals and ports on the modules.
? Brands of PLC to be treated.
? Allen-Bradley (RS 500 Micro-Logix).
? Siemens (S7-300).
? Omron (CPIE)
4. Fundamentals of PLC Programming.
? Programming units and using PC as programming unit, also Communication ports.
? Programming Languages and representation in FBD and LAD.
? Basic components and their symbols.
5. Understanding Relay concept.
? Relay wiring for logical gates.
6. Sensor: Actuator Concept for an associated process.

WEEK 2.
1. Siemens PLC (S7-300)
? Hardware and Software details.
? Front panel controls and communication details for S7-300 PLC.
? Selecting the operating mode for the S7-300 CPU.
? Specifications Capabilities of S7-300 PLC.
? Fixed Slots and Variable addressing for S7-300 PLC.
? Getting familiar with step 7 screens, options and navigation.
? Solving and developing Logic.
? Editing and modifying Ladder Logic Programs.
? Using Timers.
? Counters
? Flasher, using timers.
? Comparison Instructions.
? Mathematical Instructions
? Scaling analog values.
? Uploading and Downloading.
? Solving problems and software practice.
2. Allen-Bradley PLC (RS 500 Micro-Logix).
? Hardware and Software Details.
? Front panel controls and communication details.
? Selecting the operating mode for RS 500.
? Addressing of RS 500.
? Solving and Developing Logics.
? Editing and Modifying Logic Programs.
? Using Timers.
? Counters.
? Integers.
? Memory addressing.
? Float.
? Jump.
? Subroutine.
? Comparison.
? Control Reset (MCR).
? Swap (SWP).
? Uploading and Downloading.
? Solving Problems and Software Practice.
3. Omron PLC (CPIE).
? Hardware and Software details.
? Communication details.
? Selecting the Operating mode for CPIE.
? Addressing of Omron PLC.
? Developing Logics.
? Editing and Modifying Logic diagrams.
? Using Timers
? Counters
? Jump.
? Subroutine.
? Uploading and Downloading.
? Problems Solving and Software Practice.
4. Introduction to SCADA (Wonderware InTouch).
? Introduction to Wonderware InTouch SCADA Software.
? Applications of SCADA Software.
? Features of SCADA (Wonderware InTouch).




DATE:10th - 28th Oct 2016
DURATION: 3WEEKS
TIME: 9AM TO 1PM
COST: 80,000 (ON PROMO)

PAY BEFORE 7TH OCT AND GET 10K DISCOUNT

Venue: 14 Woji road rumuogba Port Harcourt
Website: www. hightechng. com
Phone: 234- 7035816455, 07012321020

57
SATURDAY JOBS / Instrumentation and Control Engineering
« on: September 23, 2016, 10:57:09 AM »
UPDATED FOR OCTOBER 2016

NB: GET 10K DISCOUNT IF YOU PAY BEFORE 7TH OCT 2016


High-Tech IT and Engineering is now the official partner of SMEC LAB a division of SMEC AUTOMATION INDIA (ISO 9001:2008 Certified) on Instrumentation and Control Engineering training in Nigeria.
For your world class hands on skill Instrumentation and Control Engineering training with internationally recognized certificate call on us now.
BENEFIT OF TRAINING WITH US
(1) Training s are purely hands on skill as outlined in the course content
(2) Our certificate is internationally recognized
(3) We partner with some of the industrial major player like Schneider Electric etc
(4) Free job consultancy and placement
(5) Free accommodation for our international courses
(6) 10% discount on our international course
(7) We help you process your visa and flight on request.




Date: 10TH - 28TH OCTOBER 2016
Time: 1pm - 4pm & 5pm - 8pm Respectively daily
EXAMINATION and CERTIFICATION

COST: 65,000 (COST COVERS MATERIALS,TRAINING AND CERTIFICATE)
NB: GET 10K DISCOUNT IF YOU PAY BEFORE 7TH OCT 2016

NB: COMFORTABLE ACCOMMODATION COULD BE ARRANGED AT 3,000 PER DAY FOR CLIENTS


TEL: 07035816455
BBM: 7E36F937
EMAIL: info@hightechng.com
www.hightechng.com

YOU WILL LEARN
Instrumentation and Control
? Defining what to measure, why a parameter measure and how to measure.

? Determining and using the many control strategies, equipment and computer systems common to an oil and gas facility.

? Identifying equipment and instrument characteristics and using appropriate instrumentation and controls.

? Defining and integrating components into systems that monitor and locally control the process (and related equipment), safety systems, and the communications and remote control systems use.

ABOUT THE COURSE
This course provides an overview of process systems instrumentation, and control strategies and configurations. The focus is on application and integration into the process and control of upstream and midstream oil and gas facilities. The material of the course is applicable to field production facilities, pipelines, gas plants, and offshore systems.
? Process systems operations and the key characteristics, and measurement needs, as well as

? Techniques to measure and control.

? Control modes and their applications, communications requirements, and the operator and

? Computer controller interface.

? Interrelationships between process, equipment, instruments and controls.

? Field (facility) control and monitoring systems such as pressure and level indicators and controllers.

? Field (facility) safety monitoring and response systems including SIS, HIPPS and emergency shutdown valves.

? System-wide considerations including communications, local control, remote control, and

? Data management and use.


COURSE CONTENT

GENERAL MODULE 1:
Safety in Oil and Gas
Subsurface oil and gas activities Overview
Oil and Gas definitions from origin -modern day Drilling technology (video)
Reservoir analysis and in-put to process engineering (video)

GENERAL MODULE 2:
Overview of typical Onshore and Offshore oil and Gas processing facility - Onshore Oil processing system units
Wellhead
Flow lines
Inlet manifold
Separators ? detailed operating system demonstration ? (video)
Surge vessel
LACT unit
Export pumps



- Overview of Crude Oil tank farm
- Oily water treatment units


GENERAL MODULE 3:
Offshore Oil and Gas facilities Overview
INSTRUMENT MODULES:
Understanding Instrumentation, control and automation engineering
? Understanding Conceptual Engineering, Front End Engineering Design, Detailed Engineering Design and Process deliverable sessions for optimal design

? In-country Oil & Gas Regulations, International Codes & Standards, Specifications, Recommended Practices, Publications, Bulletins & Technical Reports

? Introduction to instrument components and piping related components

? Valve types and function (manual and controlled)

? Identifying general process and safety device Symbols

? Understanding ICA (Instrumentation /Controls and automation) interface with Process engineering and Mechanical Piping o Understanding a PI& using the Legend Sheet

? Typical oil industry pipe sizes
? Pressure Rating
? What is valve tagging?
? Flow direction symbols
? Understanding Operating and design P, V, T data
Site Visit Activities
? Understanding and capturing requirement from a typical Project Scope prior to site visit
? How to prepare a Check List and Site Visit Report

Generating IC&A and Process Interface drawings -Generating SAFE chart (Practice exercise)
? Generating a Block diagram e.g. SDV Panel Block Diagram (Practice exercise)

? Generating Tie-in Schematics e.g. Main Control Panel/Gas Lift Panel

? Generating IC&A and Piping interface drawings
? Generating Level Indicator Hook-up Details
? Generating Flow meter Installation Details
? Generating Pressure Indicator Hook-up details
? Generating Pressure Temperature Indicator Hook-up
? Generating Pressure Level Switch Installation Details
? Generating Pressure LIC/LV Installation Details
? Generating Pressure PC/PCV Installation Details
? Generating Pressure PSH/PSL/PI Installation Details
? Generating Pressure Shutdown Valve Installation Details
? Generating Pressure Chart Recorder - Mounting Detail

PLC & IL
PLC
? Understanding the actual meaning of PLC
? Importance of PLC in IC&A design works for oil & gas sector
? Logics as regards to designs for control panels and other related automated cubicles
? Help out in the programming of PLCs and know whatever information required by the manufacturers
? Understand various programming languages of the PLC in line with IEC- 61131-3
? Knowing what input and output devices and other PLC/PAC Equipment
? Knowing how the PLC communication concept, e.g the Ethernet, master slave networks, RTU/DCS/HMI interfaces, Drivers, etc.
? Understanding Human-machine interface functions


Generating Instrument lists (IL)
? Definition of Instrument list
? To understand the purpose of having an instrument list
? To effectively read and interpret the Instrument list
? To know the composition of Instrument list

Overview of Instrument unit installation

? To understand the use of installation details in instrumentation
? To understand and extract the materials for construction
? To effectively read and recognize the various valves, tubing and cablings
? Involved in the various installation details
? To understand how to extract material take off or Bill of materials from
? To read and analyze various Installation details



Field Instrumentation
? Understanding instrument unit Location Plan
? To understand the use of location plans or layouts in instrumentation
? To understand and read location plans for detection of equipment on Plans
? Generating instrument Loop diagrams
? To understand the use of Loop Diagrams in instrumentation
? To generate loop Diagrams from the P&IDs
? To effectively read and recognize the various valves, tubing?s and cablings Involved in the Loop Diagrams
? To understand every connections or interrelationships involved in loop Diagrams
? To read and analyze various Loop Diagrams.
? Generating instrument tubing and Tray layout e.g. using Equipment layout drawing

DCS Initiative
? Understanding the DCS initiatives
? Introduction to DCS
? Evolution from DCS to Smaller hybrid systems, large Enterprise-wide systems, and so called open control Systems
? Comparing DCS to traditional single-loop, central computer, PLC, PAC, PC, and SCADA architectures, along with fiber-optic, wireless, multiple field buses, Safety systems and security issues.

Fundamentals of SIF Workshop in safe oil and Gas Operations -SIL Classification
? Introduction to Safety Analysis and System Design
? Protection Concepts and Safety Analysis

Date: 10TH - 28TH OCTOBER 2016
Time: 1pm - 4pm & 5pm - 8pm Respectively daily
EXAMINATION and CERTIFICATION

COST: 65,000 (COST COVERS MATERIALS,TRAINING AND CERTIFICATE)
NB: GET 10K DISCOUNT IF YOU PAY BEFORE 7TH OCT 2016



NB: COMFORTABLE ACCOMMODATION COULD BE ARRANGED AT 3,000 PER DAY FOR CLIENTS

TEL: 07035816455
BBM: 7E36F937
EMAIL: info@hightechng.com
www.hightechng.com

58
FRIDAY JOBS / Instrumentation and Control Engineering
« on: September 23, 2016, 10:56:51 AM »
UPDATED FOR OCTOBER 2016

NB: GET 10K DISCOUNT IF YOU PAY BEFORE 7TH OCT 2016


High-Tech IT and Engineering is now the official partner of SMEC LAB a division of SMEC AUTOMATION INDIA (ISO 9001:2008 Certified) on Instrumentation and Control Engineering training in Nigeria.
For your world class hands on skill Instrumentation and Control Engineering training with internationally recognized certificate call on us now.
BENEFIT OF TRAINING WITH US
(1) Training s are purely hands on skill as outlined in the course content
(2) Our certificate is internationally recognized
(3) We partner with some of the industrial major player like Schneider Electric etc
(4) Free job consultancy and placement
(5) Free accommodation for our international courses
(6) 10% discount on our international course
(7) We help you process your visa and flight on request.




Date: 10TH - 28TH OCTOBER 2016
Time: 1pm - 4pm & 5pm - 8pm Respectively daily
EXAMINATION and CERTIFICATION

COST: 65,000 (COST COVERS MATERIALS,TRAINING AND CERTIFICATE)
NB: GET 10K DISCOUNT IF YOU PAY BEFORE 7TH OCT 2016

NB: COMFORTABLE ACCOMMODATION COULD BE ARRANGED AT 3,000 PER DAY FOR CLIENTS


TEL: 07035816455
BBM: 7E36F937
EMAIL: info@hightechng.com
www.hightechng.com

YOU WILL LEARN
Instrumentation and Control
? Defining what to measure, why a parameter measure and how to measure.

? Determining and using the many control strategies, equipment and computer systems common to an oil and gas facility.

? Identifying equipment and instrument characteristics and using appropriate instrumentation and controls.

? Defining and integrating components into systems that monitor and locally control the process (and related equipment), safety systems, and the communications and remote control systems use.

ABOUT THE COURSE
This course provides an overview of process systems instrumentation, and control strategies and configurations. The focus is on application and integration into the process and control of upstream and midstream oil and gas facilities. The material of the course is applicable to field production facilities, pipelines, gas plants, and offshore systems.
? Process systems operations and the key characteristics, and measurement needs, as well as

? Techniques to measure and control.

? Control modes and their applications, communications requirements, and the operator and

? Computer controller interface.

? Interrelationships between process, equipment, instruments and controls.

? Field (facility) control and monitoring systems such as pressure and level indicators and controllers.

? Field (facility) safety monitoring and response systems including SIS, HIPPS and emergency shutdown valves.

? System-wide considerations including communications, local control, remote control, and

? Data management and use.


COURSE CONTENT

GENERAL MODULE 1:
Safety in Oil and Gas
Subsurface oil and gas activities Overview
Oil and Gas definitions from origin -modern day Drilling technology (video)
Reservoir analysis and in-put to process engineering (video)

GENERAL MODULE 2:
Overview of typical Onshore and Offshore oil and Gas processing facility - Onshore Oil processing system units
Wellhead
Flow lines
Inlet manifold
Separators ? detailed operating system demonstration ? (video)
Surge vessel
LACT unit
Export pumps



- Overview of Crude Oil tank farm
- Oily water treatment units


GENERAL MODULE 3:
Offshore Oil and Gas facilities Overview
INSTRUMENT MODULES:
Understanding Instrumentation, control and automation engineering
? Understanding Conceptual Engineering, Front End Engineering Design, Detailed Engineering Design and Process deliverable sessions for optimal design

? In-country Oil & Gas Regulations, International Codes & Standards, Specifications, Recommended Practices, Publications, Bulletins & Technical Reports

? Introduction to instrument components and piping related components

? Valve types and function (manual and controlled)

? Identifying general process and safety device Symbols

? Understanding ICA (Instrumentation /Controls and automation) interface with Process engineering and Mechanical Piping o Understanding a PI& using the Legend Sheet

? Typical oil industry pipe sizes
? Pressure Rating
? What is valve tagging?
? Flow direction symbols
? Understanding Operating and design P, V, T data
Site Visit Activities
? Understanding and capturing requirement from a typical Project Scope prior to site visit
? How to prepare a Check List and Site Visit Report

Generating IC&A and Process Interface drawings -Generating SAFE chart (Practice exercise)
? Generating a Block diagram e.g. SDV Panel Block Diagram (Practice exercise)

? Generating Tie-in Schematics e.g. Main Control Panel/Gas Lift Panel

? Generating IC&A and Piping interface drawings
? Generating Level Indicator Hook-up Details
? Generating Flow meter Installation Details
? Generating Pressure Indicator Hook-up details
? Generating Pressure Temperature Indicator Hook-up
? Generating Pressure Level Switch Installation Details
? Generating Pressure LIC/LV Installation Details
? Generating Pressure PC/PCV Installation Details
? Generating Pressure PSH/PSL/PI Installation Details
? Generating Pressure Shutdown Valve Installation Details
? Generating Pressure Chart Recorder - Mounting Detail

PLC & IL
PLC
? Understanding the actual meaning of PLC
? Importance of PLC in IC&A design works for oil & gas sector
? Logics as regards to designs for control panels and other related automated cubicles
? Help out in the programming of PLCs and know whatever information required by the manufacturers
? Understand various programming languages of the PLC in line with IEC- 61131-3
? Knowing what input and output devices and other PLC/PAC Equipment
? Knowing how the PLC communication concept, e.g the Ethernet, master slave networks, RTU/DCS/HMI interfaces, Drivers, etc.
? Understanding Human-machine interface functions


Generating Instrument lists (IL)
? Definition of Instrument list
? To understand the purpose of having an instrument list
? To effectively read and interpret the Instrument list
? To know the composition of Instrument list

Overview of Instrument unit installation

? To understand the use of installation details in instrumentation
? To understand and extract the materials for construction
? To effectively read and recognize the various valves, tubing and cablings
? Involved in the various installation details
? To understand how to extract material take off or Bill of materials from
? To read and analyze various Installation details



Field Instrumentation
? Understanding instrument unit Location Plan
? To understand the use of location plans or layouts in instrumentation
? To understand and read location plans for detection of equipment on Plans
? Generating instrument Loop diagrams
? To understand the use of Loop Diagrams in instrumentation
? To generate loop Diagrams from the P&IDs
? To effectively read and recognize the various valves, tubing?s and cablings Involved in the Loop Diagrams
? To understand every connections or interrelationships involved in loop Diagrams
? To read and analyze various Loop Diagrams.
? Generating instrument tubing and Tray layout e.g. using Equipment layout drawing

DCS Initiative
? Understanding the DCS initiatives
? Introduction to DCS
? Evolution from DCS to Smaller hybrid systems, large Enterprise-wide systems, and so called open control Systems
? Comparing DCS to traditional single-loop, central computer, PLC, PAC, PC, and SCADA architectures, along with fiber-optic, wireless, multiple field buses, Safety systems and security issues.

Fundamentals of SIF Workshop in safe oil and Gas Operations -SIL Classification
? Introduction to Safety Analysis and System Design
? Protection Concepts and Safety Analysis

Date: 10TH - 28TH OCTOBER 2016
Time: 1pm - 4pm & 5pm - 8pm Respectively daily
EXAMINATION and CERTIFICATION

COST: 65,000 (COST COVERS MATERIALS,TRAINING AND CERTIFICATE)
NB: GET 10K DISCOUNT IF YOU PAY BEFORE 7TH OCT 2016



NB: COMFORTABLE ACCOMMODATION COULD BE ARRANGED AT 3,000 PER DAY FOR CLIENTS

TEL: 07035816455
BBM: 7E36F937
EMAIL: info@hightechng.com
www.hightechng.com

59
FRIDAY JOBS / INDUSTRIAL AUTOMATION AND CONTROL ENGINEERING
« on: September 22, 2016, 11:35:01 AM »
INDUSTRIAL AUTOMATION AND DESIGN SYSTEMS
YOU WILL LEARN
? Defining what to measure, why a parameter measure and how to measure .
? Determining and using the many control strategies, equipment and computer systems common to an oil and gas facility.
? Identifying equipment and instrument characteristics and using appropriate instrumentation and controls.
? Defining and integrating components into systems that monitor and locally control the process
(and related equipment), safety systems, and the communications and remote control systems use.

ABOUT THE COURSE

This course provides an overview of process systems automations, and control strategies and configurations. The focus is on applicatio and integration into the process and control of upstream and midstream oil and gas facilities. The material of the course is applicable to field production facilities, pipelines, gas plants, and offshore systems.
? Process systems operations and the key characteristics, and measurement needs, as well as
? Techniques to measure and control.
? Control modes and their applications, communications requirements, and the operator and Computer controller interface.
? Interrelationships between process, equipment, instruments and controls.
? Field (facility) control and monitoring systems such as pressure and level indicators and controllers.
? Field (facility) safety monitoring and response systems including SIS, HIPPS and emergency shutdown valves.
? System-wide considerations including communications, local control, remote control, and
? Data management and use.

WEEK 1.
COURSE CONTENT FOR AUTOMATION TRAINING.
1. Introduction to Automation
2. Brief History of PLC.
? Need and advantages of PLC.
? PLC Configurations.
? System Block diagram.
? PLC Classifications and types.
3. How PLC Works.
? General Architecture of PLC.
? Hardware details of PLC including front indications, terminals and ports on the modules.
? Brands of PLC to be treated.
? Allen-Bradley (RS 500 Micro-Logix).
? Siemens (S7-300).
? Omron (CPIE)
4. Fundamentals of PLC Programming.
? Programming units and using PC as programming unit, also Communication ports.
? Programming Languages and representation in FBD and LAD.
? Basic components and their symbols.
5. Understanding Relay concept.
? Relay wiring for logical gates.
6. Sensor: Actuator Concept for an associated process.

WEEK 2.
1. Siemens PLC (S7-300)
? Hardware and Software details.
? Front panel controls and communication details for S7-300 PLC.
? Selecting the operating mode for the S7-300 CPU.
? Specifications Capabilities of S7-300 PLC.
? Fixed Slots and Variable addressing for S7-300 PLC.
? Getting familiar with step 7 screens, options and navigation.
? Solving and developing Logic.
? Editing and modifying Ladder Logic Programs.
? Using Timers.
? Counters
? Flasher, using timers.
? Comparison Instructions.
? Mathematical Instructions
? Scaling analog values.
? Uploading and Downloading.
? Solving problems and software practice.
2. Allen-Bradley PLC (RS 500 Micro-Logix).
? Hardware and Software Details.
? Front panel controls and communication details.
? Selecting the operating mode for RS 500.
? Addressing of RS 500.
? Solving and Developing Logics.
? Editing and Modifying Logic Programs.
? Using Timers.
? Counters.
? Integers.
? Memory addressing.
? Float.
? Jump.
? Subroutine.
? Comparison.
? Control Reset (MCR).
? Swap (SWP).
? Uploading and Downloading.
? Solving Problems and Software Practice.
3. Omron PLC (CPIE).
? Hardware and Software details.
? Communication details.
? Selecting the Operating mode for CPIE.
? Addressing of Omron PLC.
? Developing Logics.
? Editing and Modifying Logic diagrams.
? Using Timers
? Counters
? Jump.
? Subroutine.
? Uploading and Downloading.
? Problems Solving and Software Practice.
4. Introduction to SCADA (Wonderware InTouch).
? Introduction to Wonderware InTouch SCADA Software.
? Applications of SCADA Software.
? Features of SCADA (Wonderware InTouch).




DATE:10th - 28th Oct 2016
DURATION: 3WEEKS
TIME: 9AM TO 1PM
COST: 80,000 (ON PROMO)

PAY BEFORE 7TH OCT AND GET 10K DISCOUNT

Venue: 14 Woji road rumuogba Port Harcourt
Website: www. hightechng. com
Phone: 234- 7035816455, 07012321020

60
INDUSTRIAL AUTOMATION AND DESIGN SYSTEMS
YOU WILL LEARN
? Defining what to measure, why a parameter measure and how to measure .
? Determining and using the many control strategies, equipment and computer systems common to an oil and gas facility.
? Identifying equipment and instrument characteristics and using appropriate instrumentation and controls.
? Defining and integrating components into systems that monitor and locally control the process
(and related equipment), safety systems, and the communications and remote control systems use.

ABOUT THE COURSE

This course provides an overview of process systems automations, and control strategies and configurations. The focus is on applicatio and integration into the process and control of upstream and midstream oil and gas facilities. The material of the course is applicable to field production facilities, pipelines, gas plants, and offshore systems.
? Process systems operations and the key characteristics, and measurement needs, as well as
? Techniques to measure and control.
? Control modes and their applications, communications requirements, and the operator and Computer controller interface.
? Interrelationships between process, equipment, instruments and controls.
? Field (facility) control and monitoring systems such as pressure and level indicators and controllers.
? Field (facility) safety monitoring and response systems including SIS, HIPPS and emergency shutdown valves.
? System-wide considerations including communications, local control, remote control, and
? Data management and use.

WEEK 1.
COURSE CONTENT FOR AUTOMATION TRAINING.
1. Introduction to Automation
2. Brief History of PLC.
? Need and advantages of PLC.
? PLC Configurations.
? System Block diagram.
? PLC Classifications and types.
3. How PLC Works.
? General Architecture of PLC.
? Hardware details of PLC including front indications, terminals and ports on the modules.
? Brands of PLC to be treated.
? Allen-Bradley (RS 500 Micro-Logix).
? Siemens (S7-300).
? Omron (CPIE)
4. Fundamentals of PLC Programming.
? Programming units and using PC as programming unit, also Communication ports.
? Programming Languages and representation in FBD and LAD.
? Basic components and their symbols.
5. Understanding Relay concept.
? Relay wiring for logical gates.
6. Sensor: Actuator Concept for an associated process.

WEEK 2.
1. Siemens PLC (S7-300)
? Hardware and Software details.
? Front panel controls and communication details for S7-300 PLC.
? Selecting the operating mode for the S7-300 CPU.
? Specifications Capabilities of S7-300 PLC.
? Fixed Slots and Variable addressing for S7-300 PLC.
? Getting familiar with step 7 screens, options and navigation.
? Solving and developing Logic.
? Editing and modifying Ladder Logic Programs.
? Using Timers.
? Counters
? Flasher, using timers.
? Comparison Instructions.
? Mathematical Instructions
? Scaling analog values.
? Uploading and Downloading.
? Solving problems and software practice.
2. Allen-Bradley PLC (RS 500 Micro-Logix).
? Hardware and Software Details.
? Front panel controls and communication details.
? Selecting the operating mode for RS 500.
? Addressing of RS 500.
? Solving and Developing Logics.
? Editing and Modifying Logic Programs.
? Using Timers.
? Counters.
? Integers.
? Memory addressing.
? Float.
? Jump.
? Subroutine.
? Comparison.
? Control Reset (MCR).
? Swap (SWP).
? Uploading and Downloading.
? Solving Problems and Software Practice.
3. Omron PLC (CPIE).
? Hardware and Software details.
? Communication details.
? Selecting the Operating mode for CPIE.
? Addressing of Omron PLC.
? Developing Logics.
? Editing and Modifying Logic diagrams.
? Using Timers
? Counters
? Jump.
? Subroutine.
? Uploading and Downloading.
? Problems Solving and Software Practice.
4. Introduction to SCADA (Wonderware InTouch).
? Introduction to Wonderware InTouch SCADA Software.
? Applications of SCADA Software.
? Features of SCADA (Wonderware InTouch).




DATE:10th - 28th Oct 2016
DURATION: 3WEEKS
TIME: 9AM TO 1PM
COST: 80,000 (ON PROMO)

PAY BEFORE 7TH OCT AND GET 10K DISCOUNT

Venue: 14 Woji road rumuogba Port Harcourt
Website: www. hightechng. com
Phone: 234- 7035816455, 07012321020

61
FRIDAY JOBS / Instrumentation and Control Engineering
« on: September 22, 2016, 11:33:42 AM »
UPDATED FOR OCTOBER 2016

NB: GET 10K DISCOUNT IF YOU PAY BEFORE 7TH OCT 2016


High-Tech IT and Engineering is now the official partner of SMEC LAB a division of SMEC AUTOMATION INDIA (ISO 9001:2008 Certified) on Instrumentation and Control Engineering training in Nigeria.
For your world class hands on skill Instrumentation and Control Engineering training with internationally recognized certificate call on us now.
BENEFIT OF TRAINING WITH US
(1) Training s are purely hands on skill as outlined in the course content
(2) Our certificate is internationally recognized
(3) We partner with some of the industrial major player like Schneider Electric etc
(4) Free job consultancy and placement
(5) Free accommodation for our international courses
(6) 10% discount on our international course
(7) We help you process your visa and flight on request.




Date: 10TH - 28TH OCTOBER 2016
Time: 1pm - 4pm & 5pm - 8pm Respectively daily
EXAMINATION and CERTIFICATION

COST: 65,000 (COST COVERS MATERIALS,TRAINING AND CERTIFICATE)
NB: GET 10K DISCOUNT IF YOU PAY BEFORE 7TH OCT 2016

NB: COMFORTABLE ACCOMMODATION COULD BE ARRANGED AT 3,000 PER DAY FOR CLIENTS


TEL: 07035816455
BBM: 7E36F937
EMAIL: info@hightechng.com
www.hightechng.com

YOU WILL LEARN
Instrumentation and Control
? Defining what to measure, why a parameter measure and how to measure.

? Determining and using the many control strategies, equipment and computer systems common to an oil and gas facility.

? Identifying equipment and instrument characteristics and using appropriate instrumentation and controls.

? Defining and integrating components into systems that monitor and locally control the process (and related equipment), safety systems, and the communications and remote control systems use.

ABOUT THE COURSE
This course provides an overview of process systems instrumentation, and control strategies and configurations. The focus is on application and integration into the process and control of upstream and midstream oil and gas facilities. The material of the course is applicable to field production facilities, pipelines, gas plants, and offshore systems.
? Process systems operations and the key characteristics, and measurement needs, as well as

? Techniques to measure and control.

? Control modes and their applications, communications requirements, and the operator and

? Computer controller interface.

? Interrelationships between process, equipment, instruments and controls.

? Field (facility) control and monitoring systems such as pressure and level indicators and controllers.

? Field (facility) safety monitoring and response systems including SIS, HIPPS and emergency shutdown valves.

? System-wide considerations including communications, local control, remote control, and

? Data management and use.


COURSE CONTENT

GENERAL MODULE 1:
Safety in Oil and Gas
Subsurface oil and gas activities Overview
Oil and Gas definitions from origin -modern day Drilling technology (video)
Reservoir analysis and in-put to process engineering (video)

GENERAL MODULE 2:
Overview of typical Onshore and Offshore oil and Gas processing facility - Onshore Oil processing system units
Wellhead
Flow lines
Inlet manifold
Separators ? detailed operating system demonstration ? (video)
Surge vessel
LACT unit
Export pumps



- Overview of Crude Oil tank farm
- Oily water treatment units


GENERAL MODULE 3:
Offshore Oil and Gas facilities Overview
INSTRUMENT MODULES:
Understanding Instrumentation, control and automation engineering
? Understanding Conceptual Engineering, Front End Engineering Design, Detailed Engineering Design and Process deliverable sessions for optimal design

? In-country Oil & Gas Regulations, International Codes & Standards, Specifications, Recommended Practices, Publications, Bulletins & Technical Reports

? Introduction to instrument components and piping related components

? Valve types and function (manual and controlled)

? Identifying general process and safety device Symbols

? Understanding ICA (Instrumentation /Controls and automation) interface with Process engineering and Mechanical Piping o Understanding a PI& using the Legend Sheet

? Typical oil industry pipe sizes
? Pressure Rating
? What is valve tagging?
? Flow direction symbols
? Understanding Operating and design P, V, T data
Site Visit Activities
? Understanding and capturing requirement from a typical Project Scope prior to site visit
? How to prepare a Check List and Site Visit Report

Generating IC&A and Process Interface drawings -Generating SAFE chart (Practice exercise)
? Generating a Block diagram e.g. SDV Panel Block Diagram (Practice exercise)

? Generating Tie-in Schematics e.g. Main Control Panel/Gas Lift Panel

? Generating IC&A and Piping interface drawings
? Generating Level Indicator Hook-up Details
? Generating Flow meter Installation Details
? Generating Pressure Indicator Hook-up details
? Generating Pressure Temperature Indicator Hook-up
? Generating Pressure Level Switch Installation Details
? Generating Pressure LIC/LV Installation Details
? Generating Pressure PC/PCV Installation Details
? Generating Pressure PSH/PSL/PI Installation Details
? Generating Pressure Shutdown Valve Installation Details
? Generating Pressure Chart Recorder - Mounting Detail

PLC & IL
PLC
? Understanding the actual meaning of PLC
? Importance of PLC in IC&A design works for oil & gas sector
? Logics as regards to designs for control panels and other related automated cubicles
? Help out in the programming of PLCs and know whatever information required by the manufacturers
? Understand various programming languages of the PLC in line with IEC- 61131-3
? Knowing what input and output devices and other PLC/PAC Equipment
? Knowing how the PLC communication concept, e.g the Ethernet, master slave networks, RTU/DCS/HMI interfaces, Drivers, etc.
? Understanding Human-machine interface functions


Generating Instrument lists (IL)
? Definition of Instrument list
? To understand the purpose of having an instrument list
? To effectively read and interpret the Instrument list
? To know the composition of Instrument list

Overview of Instrument unit installation

? To understand the use of installation details in instrumentation
? To understand and extract the materials for construction
? To effectively read and recognize the various valves, tubing and cablings
? Involved in the various installation details
? To understand how to extract material take off or Bill of materials from
? To read and analyze various Installation details



Field Instrumentation
? Understanding instrument unit Location Plan
? To understand the use of location plans or layouts in instrumentation
? To understand and read location plans for detection of equipment on Plans
? Generating instrument Loop diagrams
? To understand the use of Loop Diagrams in instrumentation
? To generate loop Diagrams from the P&IDs
? To effectively read and recognize the various valves, tubing?s and cablings Involved in the Loop Diagrams
? To understand every connections or interrelationships involved in loop Diagrams
? To read and analyze various Loop Diagrams.
? Generating instrument tubing and Tray layout e.g. using Equipment layout drawing

DCS Initiative
? Understanding the DCS initiatives
? Introduction to DCS
? Evolution from DCS to Smaller hybrid systems, large Enterprise-wide systems, and so called open control Systems
? Comparing DCS to traditional single-loop, central computer, PLC, PAC, PC, and SCADA architectures, along with fiber-optic, wireless, multiple field buses, Safety systems and security issues.

Fundamentals of SIF Workshop in safe oil and Gas Operations -SIL Classification
? Introduction to Safety Analysis and System Design
? Protection Concepts and Safety Analysis

Date: 10TH - 28TH OCTOBER 2016
Time: 1pm - 4pm & 5pm - 8pm Respectively daily
EXAMINATION and CERTIFICATION

COST: 65,000 (COST COVERS MATERIALS,TRAINING AND CERTIFICATE)
NB: GET 10K DISCOUNT IF YOU PAY BEFORE 7TH OCT 2016



NB: COMFORTABLE ACCOMMODATION COULD BE ARRANGED AT 3,000 PER DAY FOR CLIENTS

TEL: 07035816455
BBM: 7E36F937
EMAIL: info@hightechng.com
www.hightechng.com

62
UPDATED FOR OCTOBER 2016

NB: GET 10K DISCOUNT IF YOU PAY BEFORE 7TH OCT 2016


High-Tech IT and Engineering is now the official partner of SMEC LAB a division of SMEC AUTOMATION INDIA (ISO 9001:2008 Certified) on Instrumentation and Control Engineering training in Nigeria.
For your world class hands on skill Instrumentation and Control Engineering training with internationally recognized certificate call on us now.
BENEFIT OF TRAINING WITH US
(1) Training s are purely hands on skill as outlined in the course content
(2) Our certificate is internationally recognized
(3) We partner with some of the industrial major player like Schneider Electric etc
(4) Free job consultancy and placement
(5) Free accommodation for our international courses
(6) 10% discount on our international course
(7) We help you process your visa and flight on request.




Date: 10TH - 28TH OCTOBER 2016
Time: 1pm - 4pm & 5pm - 8pm Respectively daily
EXAMINATION and CERTIFICATION

COST: 65,000 (COST COVERS MATERIALS,TRAINING AND CERTIFICATE)
NB: GET 10K DISCOUNT IF YOU PAY BEFORE 7TH OCT 2016

NB: COMFORTABLE ACCOMMODATION COULD BE ARRANGED AT 3,000 PER DAY FOR CLIENTS


TEL: 07035816455
BBM: 7E36F937
EMAIL: info@hightechng.com
www.hightechng.com

YOU WILL LEARN
Instrumentation and Control
? Defining what to measure, why a parameter measure and how to measure.

? Determining and using the many control strategies, equipment and computer systems common to an oil and gas facility.

? Identifying equipment and instrument characteristics and using appropriate instrumentation and controls.

? Defining and integrating components into systems that monitor and locally control the process (and related equipment), safety systems, and the communications and remote control systems use.

ABOUT THE COURSE
This course provides an overview of process systems instrumentation, and control strategies and configurations. The focus is on application and integration into the process and control of upstream and midstream oil and gas facilities. The material of the course is applicable to field production facilities, pipelines, gas plants, and offshore systems.
? Process systems operations and the key characteristics, and measurement needs, as well as

? Techniques to measure and control.

? Control modes and their applications, communications requirements, and the operator and

? Computer controller interface.

? Interrelationships between process, equipment, instruments and controls.

? Field (facility) control and monitoring systems such as pressure and level indicators and controllers.

? Field (facility) safety monitoring and response systems including SIS, HIPPS and emergency shutdown valves.

? System-wide considerations including communications, local control, remote control, and

? Data management and use.


COURSE CONTENT

GENERAL MODULE 1:
Safety in Oil and Gas
Subsurface oil and gas activities Overview
Oil and Gas definitions from origin -modern day Drilling technology (video)
Reservoir analysis and in-put to process engineering (video)

GENERAL MODULE 2:
Overview of typical Onshore and Offshore oil and Gas processing facility - Onshore Oil processing system units
Wellhead
Flow lines
Inlet manifold
Separators ? detailed operating system demonstration ? (video)
Surge vessel
LACT unit
Export pumps



- Overview of Crude Oil tank farm
- Oily water treatment units


GENERAL MODULE 3:
Offshore Oil and Gas facilities Overview
INSTRUMENT MODULES:
Understanding Instrumentation, control and automation engineering
? Understanding Conceptual Engineering, Front End Engineering Design, Detailed Engineering Design and Process deliverable sessions for optimal design

? In-country Oil & Gas Regulations, International Codes & Standards, Specifications, Recommended Practices, Publications, Bulletins & Technical Reports

? Introduction to instrument components and piping related components

? Valve types and function (manual and controlled)

? Identifying general process and safety device Symbols

? Understanding ICA (Instrumentation /Controls and automation) interface with Process engineering and Mechanical Piping o Understanding a PI& using the Legend Sheet

? Typical oil industry pipe sizes
? Pressure Rating
? What is valve tagging?
? Flow direction symbols
? Understanding Operating and design P, V, T data
Site Visit Activities
? Understanding and capturing requirement from a typical Project Scope prior to site visit
? How to prepare a Check List and Site Visit Report

Generating IC&A and Process Interface drawings -Generating SAFE chart (Practice exercise)
? Generating a Block diagram e.g. SDV Panel Block Diagram (Practice exercise)

? Generating Tie-in Schematics e.g. Main Control Panel/Gas Lift Panel

? Generating IC&A and Piping interface drawings
? Generating Level Indicator Hook-up Details
? Generating Flow meter Installation Details
? Generating Pressure Indicator Hook-up details
? Generating Pressure Temperature Indicator Hook-up
? Generating Pressure Level Switch Installation Details
? Generating Pressure LIC/LV Installation Details
? Generating Pressure PC/PCV Installation Details
? Generating Pressure PSH/PSL/PI Installation Details
? Generating Pressure Shutdown Valve Installation Details
? Generating Pressure Chart Recorder - Mounting Detail

PLC & IL
PLC
? Understanding the actual meaning of PLC
? Importance of PLC in IC&A design works for oil & gas sector
? Logics as regards to designs for control panels and other related automated cubicles
? Help out in the programming of PLCs and know whatever information required by the manufacturers
? Understand various programming languages of the PLC in line with IEC- 61131-3
? Knowing what input and output devices and other PLC/PAC Equipment
? Knowing how the PLC communication concept, e.g the Ethernet, master slave networks, RTU/DCS/HMI interfaces, Drivers, etc.
? Understanding Human-machine interface functions


Generating Instrument lists (IL)
? Definition of Instrument list
? To understand the purpose of having an instrument list
? To effectively read and interpret the Instrument list
? To know the composition of Instrument list

Overview of Instrument unit installation

? To understand the use of installation details in instrumentation
? To understand and extract the materials for construction
? To effectively read and recognize the various valves, tubing and cablings
? Involved in the various installation details
? To understand how to extract material take off or Bill of materials from
? To read and analyze various Installation details



Field Instrumentation
? Understanding instrument unit Location Plan
? To understand the use of location plans or layouts in instrumentation
? To understand and read location plans for detection of equipment on Plans
? Generating instrument Loop diagrams
? To understand the use of Loop Diagrams in instrumentation
? To generate loop Diagrams from the P&IDs
? To effectively read and recognize the various valves, tubing?s and cablings Involved in the Loop Diagrams
? To understand every connections or interrelationships involved in loop Diagrams
? To read and analyze various Loop Diagrams.
? Generating instrument tubing and Tray layout e.g. using Equipment layout drawing

DCS Initiative
? Understanding the DCS initiatives
? Introduction to DCS
? Evolution from DCS to Smaller hybrid systems, large Enterprise-wide systems, and so called open control Systems
? Comparing DCS to traditional single-loop, central computer, PLC, PAC, PC, and SCADA architectures, along with fiber-optic, wireless, multiple field buses, Safety systems and security issues.

Fundamentals of SIF Workshop in safe oil and Gas Operations -SIL Classification
? Introduction to Safety Analysis and System Design
? Protection Concepts and Safety Analysis

Date: 10TH - 28TH OCTOBER 2016
Time: 1pm - 4pm & 5pm - 8pm Respectively daily
EXAMINATION and CERTIFICATION

COST: 65,000 (COST COVERS MATERIALS,TRAINING AND CERTIFICATE)
NB: GET 10K DISCOUNT IF YOU PAY BEFORE 7TH OCT 2016



NB: COMFORTABLE ACCOMMODATION COULD BE ARRANGED AT 3,000 PER DAY FOR CLIENTS

TEL: 07035816455
BBM: 7E36F937
EMAIL: info@hightechng.com
www.hightechng.com

63
UPDATED FOR OCTOBER 2016

COURSE OUTLINE

Course description
This course focuses on both the management of product quality and the management of the process quality for creating project deliverables. It provides exposure to the tools, techniques, and metrics used to ensure that sufficient product and process quality is achieved. It includes assignments which allow participants to learn how to plan quality into a project and determine key metrics to manage project and process quality.
Who should attend ?
This course is primarily designed for engineers, project managers and supervisors, quality control and quality assurance personnel and anyone with interest in quality planning, control and supervision. This includes exposure to basic project management techniques such as scope, activity, and resource planning.
What you will achieve


An understanding of the relationship among quality planning, quality assurance, and quality control
An understanding of numerous tools and techniques which can be used to monitor and improve quality
The ability to develop and track key quality metrics to satisfy customer needs
The ability to determine process metrics to maintain quality standards
An understanding of the responsibilities of senior management, the project manager, and project team members to ensure the existence of an adequate quality management process



What you will learn


Roles and Responsibilities of QA / QC Engineer
Project Quality Management Principles
Tools for Project Quality Management
Models for Continuous Quality Improvement of the Project Management Process
Product Quality vs. Process Quality
Introduction to ISO 9001 . ISO 9004 , ISO 14000. ISO 19011
International Codes and Standards
Control of Nonconforming of Items / Products
Preparation of Project Quality Plan
Preparation of Inspection Test Plans ? ITPs
Final QA / QC Documentation




DATE: 10TH - 28TH OCTOBER 2016
DURATION: 2WEEKS
TIME: 11am - 1pm
COST: 40,000 (PROMO COST)

NB: GET 5K DISCOUNT IF YOU PAY BEFORE 7TH OCT 2016


Call: 07035816455 for booking

Location: 14 Woji road rumuogba Port Harcourt

www.hightechng.com or email info@hightechng.com

64
FRIDAY JOBS / QAQC Management and Engineering
« on: September 22, 2016, 11:32:10 AM »
UPDATED FOR OCTOBER 2016

COURSE OUTLINE

Course description
This course focuses on both the management of product quality and the management of the process quality for creating project deliverables. It provides exposure to the tools, techniques, and metrics used to ensure that sufficient product and process quality is achieved. It includes assignments which allow participants to learn how to plan quality into a project and determine key metrics to manage project and process quality.
Who should attend ?
This course is primarily designed for engineers, project managers and supervisors, quality control and quality assurance personnel and anyone with interest in quality planning, control and supervision. This includes exposure to basic project management techniques such as scope, activity, and resource planning.
What you will achieve


An understanding of the relationship among quality planning, quality assurance, and quality control
An understanding of numerous tools and techniques which can be used to monitor and improve quality
The ability to develop and track key quality metrics to satisfy customer needs
The ability to determine process metrics to maintain quality standards
An understanding of the responsibilities of senior management, the project manager, and project team members to ensure the existence of an adequate quality management process



What you will learn


Roles and Responsibilities of QA / QC Engineer
Project Quality Management Principles
Tools for Project Quality Management
Models for Continuous Quality Improvement of the Project Management Process
Product Quality vs. Process Quality
Introduction to ISO 9001 . ISO 9004 , ISO 14000. ISO 19011
International Codes and Standards
Control of Nonconforming of Items / Products
Preparation of Project Quality Plan
Preparation of Inspection Test Plans ? ITPs
Final QA / QC Documentation




DATE: 10TH - 28TH OCTOBER 2016
DURATION: 2WEEKS
TIME: 11am - 1pm
COST: 40,000 (PROMO COST)

NB: GET 5K DISCOUNT IF YOU PAY BEFORE 7TH OCT 2016


Call: 07035816455 for booking

Location: 14 Woji road rumuogba Port Harcourt

www.hightechng.com or email info@hightechng.com

65
UPDATED FOR SEPTEMBER 2016


High-Tech IT and Engineering is now the official partner of SMEC LAB a division of SMEC AUTOMATION INDIA (ISO 9001:2008 Certified) on Instrumentation and Control Engineering training in Nigeria.
For your world class hands on skill Instrumentation and Control Engineering training with internationally recognized certificate call on us now.
BENEFIT OF TRAINING WITH US
(1) Training s are purely hands on skill as outlined in the course content
(2) Our certificate is internationally recognized
(3) We partner with some of the industrial major player like Schneider Electric etc
(4) Free job consultancy and placement
(5) Free accommodation for our international courses
(6) 10% discount on our international course
(7) We help you process your visa and flight on request.




Date: 12TH - 30TH SEPTEMBER 2016
Time: 1pm - 4pm & 5pm - 8pm Respectively daily
EXAMINATION and CERTIFICATION

COST: 65,000 (COST COVERS MATERIALS,TRAINING AND CERTIFICATE)

NB: COMFORTABLE ACCOMMODATION COULD BE ARRANGED AT 3,000 PER DAY FOR CLIENTS

TEL: 07035816455
BBM: 7E36F937
EMAIL: info@hightechng.com
www.hightechng.com

YOU WILL LEARN
Instrumentation and Control
? Defining what to measure, why a parameter measure and how to measure.

? Determining and using the many control strategies, equipment and computer systems common to an oil and gas facility.

? Identifying equipment and instrument characteristics and using appropriate instrumentation and controls.

? Defining and integrating components into systems that monitor and locally control the process (and related equipment), safety systems, and the communications and remote control systems use.

ABOUT THE COURSE
This course provides an overview of process systems instrumentation, and control strategies and configurations. The focus is on application and integration into the process and control of upstream and midstream oil and gas facilities. The material of the course is applicable to field production facilities, pipelines, gas plants, and offshore systems.
? Process systems operations and the key characteristics, and measurement needs, as well as

? Techniques to measure and control.

? Control modes and their applications, communications requirements, and the operator and

? Computer controller interface.

? Interrelationships between process, equipment, instruments and controls.

? Field (facility) control and monitoring systems such as pressure and level indicators and controllers.

? Field (facility) safety monitoring and response systems including SIS, HIPPS and emergency shutdown valves.

? System-wide considerations including communications, local control, remote control, and

? Data management and use.


COURSE CONTENT

GENERAL MODULE 1:
Safety in Oil and Gas
Subsurface oil and gas activities Overview
Oil and Gas definitions from origin -modern day Drilling technology (video)
Reservoir analysis and in-put to process engineering (video)

GENERAL MODULE 2:
Overview of typical Onshore and Offshore oil and Gas processing facility - Onshore Oil processing system units
Wellhead
Flow lines
Inlet manifold
Separators ? detailed operating system demonstration ? (video)
Surge vessel
LACT unit
Export pumps



- Overview of Crude Oil tank farm
- Oily water treatment units


GENERAL MODULE 3:
Offshore Oil and Gas facilities Overview
INSTRUMENT MODULES:
Understanding Instrumentation, control and automation engineering
? Understanding Conceptual Engineering, Front End Engineering Design, Detailed Engineering Design and Process deliverable sessions for optimal design

? In-country Oil & Gas Regulations, International Codes & Standards, Specifications, Recommended Practices, Publications, Bulletins & Technical Reports

? Introduction to instrument components and piping related components

? Valve types and function (manual and controlled)

? Identifying general process and safety device Symbols

? Understanding ICA (Instrumentation /Controls and automation) interface with Process engineering and Mechanical Piping o Understanding a PI& using the Legend Sheet

? Typical oil industry pipe sizes
? Pressure Rating
? What is valve tagging?
? Flow direction symbols
? Understanding Operating and design P, V, T data
Site Visit Activities
? Understanding and capturing requirement from a typical Project Scope prior to site visit
? How to prepare a Check List and Site Visit Report

Generating IC&A and Process Interface drawings -Generating SAFE chart (Practice exercise)
? Generating a Block diagram e.g. SDV Panel Block Diagram (Practice exercise)

? Generating Tie-in Schematics e.g. Main Control Panel/Gas Lift Panel

? Generating IC&A and Piping interface drawings
? Generating Level Indicator Hook-up Details
? Generating Flow meter Installation Details
? Generating Pressure Indicator Hook-up details
? Generating Pressure Temperature Indicator Hook-up
? Generating Pressure Level Switch Installation Details
? Generating Pressure LIC/LV Installation Details
? Generating Pressure PC/PCV Installation Details
? Generating Pressure PSH/PSL/PI Installation Details
? Generating Pressure Shutdown Valve Installation Details
? Generating Pressure Chart Recorder - Mounting Detail

PLC & IL
PLC
? Understanding the actual meaning of PLC
? Importance of PLC in IC&A design works for oil & gas sector
? Logics as regards to designs for control panels and other related automated cubicles
? Help out in the programming of PLCs and know whatever information required by the manufacturers
? Understand various programming languages of the PLC in line with IEC- 61131-3
? Knowing what input and output devices and other PLC/PAC Equipment
? Knowing how the PLC communication concept, e.g the Ethernet, master slave networks, RTU/DCS/HMI interfaces, Drivers, etc.
? Understanding Human-machine interface functions


Generating Instrument lists (IL)
? Definition of Instrument list
? To understand the purpose of having an instrument list
? To effectively read and interpret the Instrument list
? To know the composition of Instrument list

Overview of Instrument unit installation

? To understand the use of installation details in instrumentation
? To understand and extract the materials for construction
? To effectively read and recognize the various valves, tubing and cablings
? Involved in the various installation details
? To understand how to extract material take off or Bill of materials from
? To read and analyze various Installation details



Field Instrumentation
? Understanding instrument unit Location Plan
? To understand the use of location plans or layouts in instrumentation
? To understand and read location plans for detection of equipment on Plans
? Generating instrument Loop diagrams
? To understand the use of Loop Diagrams in instrumentation
? To generate loop Diagrams from the P&IDs
? To effectively read and recognize the various valves, tubing?s and cablings Involved in the Loop Diagrams
? To understand every connections or interrelationships involved in loop Diagrams
? To read and analyze various Loop Diagrams.
? Generating instrument tubing and Tray layout e.g. using Equipment layout drawing

DCS Initiative
? Understanding the DCS initiatives
? Introduction to DCS
? Evolution from DCS to Smaller hybrid systems, large Enterprise-wide systems, and so called open control Systems
? Comparing DCS to traditional single-loop, central computer, PLC, PAC, PC, and SCADA architectures, along with fiber-optic, wireless, multiple field buses, Safety systems and security issues.

Fundamentals of SIF Workshop in safe oil and Gas Operations -SIL Classification
? Introduction to Safety Analysis and System Design
? Protection Concepts and Safety Analysis

Date: 12TH - 30TH SEPTEMBER 2016
Time: 1pm - 4pm & 5pm - 8pm Respectively daily
EXAMINATION and CERTIFICATION

COST: 65,000 (PROMO COST AND IT COVERS MATERIALS,TRAINING AND CERTIFICATE)


NB: COMFORTABLE ACCOMMODATION COULD BE ARRANGED AT 3,000 PER DAY FOR CLIENTS

TEL: 07035816455
BBM: 7E36F937
EMAIL: info@hightechng.com
www.hightechng.com

66
UPDATED FOR SEPTEMBER 2016


High-Tech IT and Engineering is now the official partner of SMEC LAB a division of SMEC AUTOMATION INDIA (ISO 9001:2008 Certified) on Instrumentation and Control Engineering training in Nigeria.
For your world class hands on skill Instrumentation and Control Engineering training with internationally recognized certificate call on us now.
BENEFIT OF TRAINING WITH US
(1) Training s are purely hands on skill as outlined in the course content
(2) Our certificate is internationally recognized
(3) We partner with some of the industrial major player like Schneider Electric etc
(4) Free job consultancy and placement
(5) Free accommodation for our international courses
(6) 10% discount on our international course
(7) We help you process your visa and flight on request.




Date: 12TH - 30TH SEPTEMBER 2016
Time: 1pm - 4pm & 5pm - 8pm Respectively daily
EXAMINATION and CERTIFICATION

COST: 65,000 (COST COVERS MATERIALS,TRAINING AND CERTIFICATE)

NB: COMFORTABLE ACCOMMODATION COULD BE ARRANGED AT 3,000 PER DAY FOR CLIENTS

TEL: 07035816455
BBM: 7E36F937
EMAIL: info@hightechng.com
www.hightechng.com

YOU WILL LEARN
Instrumentation and Control
? Defining what to measure, why a parameter measure and how to measure.

? Determining and using the many control strategies, equipment and computer systems common to an oil and gas facility.

? Identifying equipment and instrument characteristics and using appropriate instrumentation and controls.

? Defining and integrating components into systems that monitor and locally control the process (and related equipment), safety systems, and the communications and remote control systems use.

ABOUT THE COURSE
This course provides an overview of process systems instrumentation, and control strategies and configurations. The focus is on application and integration into the process and control of upstream and midstream oil and gas facilities. The material of the course is applicable to field production facilities, pipelines, gas plants, and offshore systems.
? Process systems operations and the key characteristics, and measurement needs, as well as

? Techniques to measure and control.

? Control modes and their applications, communications requirements, and the operator and

? Computer controller interface.

? Interrelationships between process, equipment, instruments and controls.

? Field (facility) control and monitoring systems such as pressure and level indicators and controllers.

? Field (facility) safety monitoring and response systems including SIS, HIPPS and emergency shutdown valves.

? System-wide considerations including communications, local control, remote control, and

? Data management and use.


COURSE CONTENT

GENERAL MODULE 1:
Safety in Oil and Gas
Subsurface oil and gas activities Overview
Oil and Gas definitions from origin -modern day Drilling technology (video)
Reservoir analysis and in-put to process engineering (video)

GENERAL MODULE 2:
Overview of typical Onshore and Offshore oil and Gas processing facility - Onshore Oil processing system units
Wellhead
Flow lines
Inlet manifold
Separators ? detailed operating system demonstration ? (video)
Surge vessel
LACT unit
Export pumps



- Overview of Crude Oil tank farm
- Oily water treatment units


GENERAL MODULE 3:
Offshore Oil and Gas facilities Overview
INSTRUMENT MODULES:
Understanding Instrumentation, control and automation engineering
? Understanding Conceptual Engineering, Front End Engineering Design, Detailed Engineering Design and Process deliverable sessions for optimal design

? In-country Oil & Gas Regulations, International Codes & Standards, Specifications, Recommended Practices, Publications, Bulletins & Technical Reports

? Introduction to instrument components and piping related components

? Valve types and function (manual and controlled)

? Identifying general process and safety device Symbols

? Understanding ICA (Instrumentation /Controls and automation) interface with Process engineering and Mechanical Piping o Understanding a PI& using the Legend Sheet

? Typical oil industry pipe sizes
? Pressure Rating
? What is valve tagging?
? Flow direction symbols
? Understanding Operating and design P, V, T data
Site Visit Activities
? Understanding and capturing requirement from a typical Project Scope prior to site visit
? How to prepare a Check List and Site Visit Report

Generating IC&A and Process Interface drawings -Generating SAFE chart (Practice exercise)
? Generating a Block diagram e.g. SDV Panel Block Diagram (Practice exercise)

? Generating Tie-in Schematics e.g. Main Control Panel/Gas Lift Panel

? Generating IC&A and Piping interface drawings
? Generating Level Indicator Hook-up Details
? Generating Flow meter Installation Details
? Generating Pressure Indicator Hook-up details
? Generating Pressure Temperature Indicator Hook-up
? Generating Pressure Level Switch Installation Details
? Generating Pressure LIC/LV Installation Details
? Generating Pressure PC/PCV Installation Details
? Generating Pressure PSH/PSL/PI Installation Details
? Generating Pressure Shutdown Valve Installation Details
? Generating Pressure Chart Recorder - Mounting Detail

PLC & IL
PLC
? Understanding the actual meaning of PLC
? Importance of PLC in IC&A design works for oil & gas sector
? Logics as regards to designs for control panels and other related automated cubicles
? Help out in the programming of PLCs and know whatever information required by the manufacturers
? Understand various programming languages of the PLC in line with IEC- 61131-3
? Knowing what input and output devices and other PLC/PAC Equipment
? Knowing how the PLC communication concept, e.g the Ethernet, master slave networks, RTU/DCS/HMI interfaces, Drivers, etc.
? Understanding Human-machine interface functions


Generating Instrument lists (IL)
? Definition of Instrument list
? To understand the purpose of having an instrument list
? To effectively read and interpret the Instrument list
? To know the composition of Instrument list

Overview of Instrument unit installation

? To understand the use of installation details in instrumentation
? To understand and extract the materials for construction
? To effectively read and recognize the various valves, tubing and cablings
? Involved in the various installation details
? To understand how to extract material take off or Bill of materials from
? To read and analyze various Installation details



Field Instrumentation
? Understanding instrument unit Location Plan
? To understand the use of location plans or layouts in instrumentation
? To understand and read location plans for detection of equipment on Plans
? Generating instrument Loop diagrams
? To understand the use of Loop Diagrams in instrumentation
? To generate loop Diagrams from the P&IDs
? To effectively read and recognize the various valves, tubing?s and cablings Involved in the Loop Diagrams
? To understand every connections or interrelationships involved in loop Diagrams
? To read and analyze various Loop Diagrams.
? Generating instrument tubing and Tray layout e.g. using Equipment layout drawing

DCS Initiative
? Understanding the DCS initiatives
? Introduction to DCS
? Evolution from DCS to Smaller hybrid systems, large Enterprise-wide systems, and so called open control Systems
? Comparing DCS to traditional single-loop, central computer, PLC, PAC, PC, and SCADA architectures, along with fiber-optic, wireless, multiple field buses, Safety systems and security issues.

Fundamentals of SIF Workshop in safe oil and Gas Operations -SIL Classification
? Introduction to Safety Analysis and System Design
? Protection Concepts and Safety Analysis

Date: 12TH - 30TH SEPTEMBER 2016
Time: 1pm - 4pm & 5pm - 8pm Respectively daily
EXAMINATION and CERTIFICATION

COST: 65,000 (PROMO COST AND IT COVERS MATERIALS,TRAINING AND CERTIFICATE)


NB: COMFORTABLE ACCOMMODATION COULD BE ARRANGED AT 3,000 PER DAY FOR CLIENTS

TEL: 07035816455
BBM: 7E36F937
EMAIL: info@hightechng.com
www.hightechng.com

67
FRIDAY JOBS / QA/QC Management & Engineering
« on: September 09, 2016, 09:30:35 AM »
UPDATED FOR SEPTEMBER 2016

COURSE OUTLINE

Course description
This course focuses on both the management of product quality and the management of the process quality for creating project deliverables. It provides exposure to the tools, techniques, and metrics used to ensure that sufficient product and process quality is achieved. It includes assignments which allow participants to learn how to plan quality into a project and determine key metrics to manage project and process quality.
Who should attend ?
This course is primarily designed for engineers, project managers and supervisors, quality control and quality assurance personnel and anyone with interest in quality planning, control and supervision. This includes exposure to basic project management techniques such as scope, activity, and resource planning.
What you will achieve


An understanding of the relationship among quality planning, quality assurance, and quality control
An understanding of numerous tools and techniques which can be used to monitor and improve quality
The ability to develop and track key quality metrics to satisfy customer needs
The ability to determine process metrics to maintain quality standards
An understanding of the responsibilities of senior management, the project manager, and project team members to ensure the existence of an adequate quality management process



What you will learn


Roles and Responsibilities of QA / QC Engineer
Project Quality Management Principles
Tools for Project Quality Management
Models for Continuous Quality Improvement of the Project Management Process
Product Quality vs. Process Quality
Introduction to ISO 9001 . ISO 9004 , ISO 14000. ISO 19011
International Codes and Standards
Control of Nonconforming of Items / Products
Preparation of Project Quality Plan
Preparation of Inspection Test Plans ? ITPs
Final QA / QC Documentation




DATE: 12TH - 23RD SEPTEMBER 2016
DURATION: 2WEEKS
TIME: 11am - 1pm
COST: 40,000 (PROMO COST)

Call: 07035816455 for booking
Location: 14 Woji road rumuogba Port Harcourt

www.hightechng.com or email info@hightechng.com

68
SATURDAY JOBS / QA/QC Management & Engineering
« on: September 09, 2016, 09:30:23 AM »
UPDATED FOR SEPTEMBER 2016

COURSE OUTLINE

Course description
This course focuses on both the management of product quality and the management of the process quality for creating project deliverables. It provides exposure to the tools, techniques, and metrics used to ensure that sufficient product and process quality is achieved. It includes assignments which allow participants to learn how to plan quality into a project and determine key metrics to manage project and process quality.
Who should attend ?
This course is primarily designed for engineers, project managers and supervisors, quality control and quality assurance personnel and anyone with interest in quality planning, control and supervision. This includes exposure to basic project management techniques such as scope, activity, and resource planning.
What you will achieve


An understanding of the relationship among quality planning, quality assurance, and quality control
An understanding of numerous tools and techniques which can be used to monitor and improve quality
The ability to develop and track key quality metrics to satisfy customer needs
The ability to determine process metrics to maintain quality standards
An understanding of the responsibilities of senior management, the project manager, and project team members to ensure the existence of an adequate quality management process



What you will learn


Roles and Responsibilities of QA / QC Engineer
Project Quality Management Principles
Tools for Project Quality Management
Models for Continuous Quality Improvement of the Project Management Process
Product Quality vs. Process Quality
Introduction to ISO 9001 . ISO 9004 , ISO 14000. ISO 19011
International Codes and Standards
Control of Nonconforming of Items / Products
Preparation of Project Quality Plan
Preparation of Inspection Test Plans ? ITPs
Final QA / QC Documentation




DATE: 12TH - 23RD SEPTEMBER 2016
DURATION: 2WEEKS
TIME: 11am - 1pm
COST: 40,000 (PROMO COST)

Call: 07035816455 for booking
Location: 14 Woji road rumuogba Port Harcourt

www.hightechng.com or email info@hightechng.com

69
INDUSTRIAL AUTOMATION AND DESIGN SYSTEMS
YOU WILL LEARN
? Defining what to measure, why a parameter measure and how to measure .
? Determining and using the many control strategies, equipment and computer systems common to an oil and gas facility.
? Identifying equipment and instrument characteristics and using appropriate instrumentation and controls.
? Defining and integrating components into systems that monitor and locally control the process
(and related equipment), safety systems, and the communications and remote control systems use.

ABOUT THE COURSE

This course provides an overview of process systems automations, and control strategies and configurations. The focus is on applicatio and integration into the process and control of upstream and midstream oil and gas facilities. The material of the course is applicable to field production facilities, pipelines, gas plants, and offshore systems.
? Process systems operations and the key characteristics, and measurement needs, as well as
? Techniques to measure and control.
? Control modes and their applications, communications requirements, and the operator and Computer controller interface.
? Interrelationships between process, equipment, instruments and controls.
? Field (facility) control and monitoring systems such as pressure and level indicators and controllers.
? Field (facility) safety monitoring and response systems including SIS, HIPPS and emergency shutdown valves.
? System-wide considerations including communications, local control, remote control, and
? Data management and use.

WEEK 1.
COURSE CONTENT FOR AUTOMATION TRAINING.
1. Introduction to Automation
2. Brief History of PLC.
? Need and advantages of PLC.
? PLC Configurations.
? System Block diagram.
? PLC Classifications and types.
3. How PLC Works.
? General Architecture of PLC.
? Hardware details of PLC including front indications, terminals and ports on the modules.
? Brands of PLC to be treated.
? Allen-Bradley (RS 500 Micro-Logix).
? Siemens (S7-300).
? Omron (CPIE)
4. Fundamentals of PLC Programming.
? Programming units and using PC as programming unit, also Communication ports.
? Programming Languages and representation in FBD and LAD.
? Basic components and their symbols.
5. Understanding Relay concept.
? Relay wiring for logical gates.
6. Sensor: Actuator Concept for an associated process.

WEEK 2.
1. Siemens PLC (S7-300)
? Hardware and Software details.
? Front panel controls and communication details for S7-300 PLC.
? Selecting the operating mode for the S7-300 CPU.
? Specifications Capabilities of S7-300 PLC.
? Fixed Slots and Variable addressing for S7-300 PLC.
? Getting familiar with step 7 screens, options and navigation.
? Solving and developing Logic.
? Editing and modifying Ladder Logic Programs.
? Using Timers.
? Counters
? Flasher, using timers.
? Comparison Instructions.
? Mathematical Instructions
? Scaling analog values.
? Uploading and Downloading.
? Solving problems and software practice.
2. Allen-Bradley PLC (RS 500 Micro-Logix).
? Hardware and Software Details.
? Front panel controls and communication details.
? Selecting the operating mode for RS 500.
? Addressing of RS 500.
? Solving and Developing Logics.
? Editing and Modifying Logic Programs.
? Using Timers.
? Counters.
? Integers.
? Memory addressing.
? Float.
? Jump.
? Subroutine.
? Comparison.
? Control Reset (MCR).
? Swap (SWP).
? Uploading and Downloading.
? Solving Problems and Software Practice.
3. Omron PLC (CPIE).
? Hardware and Software details.
? Communication details.
? Selecting the Operating mode for CPIE.
? Addressing of Omron PLC.
? Developing Logics.
? Editing and Modifying Logic diagrams.
? Using Timers
? Counters
? Jump.
? Subroutine.
? Uploading and Downloading.
? Problems Solving and Software Practice.
4. Introduction to SCADA (Wonderware InTouch).
? Introduction to Wonderware InTouch SCADA Software.
? Applications of SCADA Software.
? Features of SCADA (Wonderware InTouch).




DATE:12th - 30th September 2016
DURATION: 3WEEKS
TIME: 9AM TO 1PM
COST: 80,000 (ON PROMO)



Venue: 14 Woji road rumuogba Port Harcourt
Website: www. hightechng. com
Phone: 234- 7035816455, 07012321020

70
INDUSTRIAL AUTOMATION AND DESIGN SYSTEMS
YOU WILL LEARN
? Defining what to measure, why a parameter measure and how to measure .
? Determining and using the many control strategies, equipment and computer systems common to an oil and gas facility.
? Identifying equipment and instrument characteristics and using appropriate instrumentation and controls.
? Defining and integrating components into systems that monitor and locally control the process
(and related equipment), safety systems, and the communications and remote control systems use.

ABOUT THE COURSE

This course provides an overview of process systems automations, and control strategies and configurations. The focus is on applicatio and integration into the process and control of upstream and midstream oil and gas facilities. The material of the course is applicable to field production facilities, pipelines, gas plants, and offshore systems.
? Process systems operations and the key characteristics, and measurement needs, as well as
? Techniques to measure and control.
? Control modes and their applications, communications requirements, and the operator and Computer controller interface.
? Interrelationships between process, equipment, instruments and controls.
? Field (facility) control and monitoring systems such as pressure and level indicators and controllers.
? Field (facility) safety monitoring and response systems including SIS, HIPPS and emergency shutdown valves.
? System-wide considerations including communications, local control, remote control, and
? Data management and use.

WEEK 1.
COURSE CONTENT FOR AUTOMATION TRAINING.
1. Introduction to Automation
2. Brief History of PLC.
? Need and advantages of PLC.
? PLC Configurations.
? System Block diagram.
? PLC Classifications and types.
3. How PLC Works.
? General Architecture of PLC.
? Hardware details of PLC including front indications, terminals and ports on the modules.
? Brands of PLC to be treated.
? Allen-Bradley (RS 500 Micro-Logix).
? Siemens (S7-300).
? Omron (CPIE)
4. Fundamentals of PLC Programming.
? Programming units and using PC as programming unit, also Communication ports.
? Programming Languages and representation in FBD and LAD.
? Basic components and their symbols.
5. Understanding Relay concept.
? Relay wiring for logical gates.
6. Sensor: Actuator Concept for an associated process.

WEEK 2.
1. Siemens PLC (S7-300)
? Hardware and Software details.
? Front panel controls and communication details for S7-300 PLC.
? Selecting the operating mode for the S7-300 CPU.
? Specifications Capabilities of S7-300 PLC.
? Fixed Slots and Variable addressing for S7-300 PLC.
? Getting familiar with step 7 screens, options and navigation.
? Solving and developing Logic.
? Editing and modifying Ladder Logic Programs.
? Using Timers.
? Counters
? Flasher, using timers.
? Comparison Instructions.
? Mathematical Instructions
? Scaling analog values.
? Uploading and Downloading.
? Solving problems and software practice.
2. Allen-Bradley PLC (RS 500 Micro-Logix).
? Hardware and Software Details.
? Front panel controls and communication details.
? Selecting the operating mode for RS 500.
? Addressing of RS 500.
? Solving and Developing Logics.
? Editing and Modifying Logic Programs.
? Using Timers.
? Counters.
? Integers.
? Memory addressing.
? Float.
? Jump.
? Subroutine.
? Comparison.
? Control Reset (MCR).
? Swap (SWP).
? Uploading and Downloading.
? Solving Problems and Software Practice.
3. Omron PLC (CPIE).
? Hardware and Software details.
? Communication details.
? Selecting the Operating mode for CPIE.
? Addressing of Omron PLC.
? Developing Logics.
? Editing and Modifying Logic diagrams.
? Using Timers
? Counters
? Jump.
? Subroutine.
? Uploading and Downloading.
? Problems Solving and Software Practice.
4. Introduction to SCADA (Wonderware InTouch).
? Introduction to Wonderware InTouch SCADA Software.
? Applications of SCADA Software.
? Features of SCADA (Wonderware InTouch).




DATE:12th - 30th September 2016
DURATION: 3WEEKS
TIME: 9AM TO 1PM
COST: 80,000 (ON PROMO)



Venue: 14 Woji road rumuogba Port Harcourt
Website: www. hightechng. com
Phone: 234- 7035816455, 07012321020

71
INDUSTRIAL AUTOMATION AND DESIGN SYSTEMS
YOU WILL LEARN
? Defining what to measure, why a parameter measure and how to measure .
? Determining and using the many control strategies, equipment and computer systems common to an oil and gas facility.
? Identifying equipment and instrument characteristics and using appropriate instrumentation and controls.
? Defining and integrating components into systems that monitor and locally control the process
(and related equipment), safety systems, and the communications and remote control systems use.

ABOUT THE COURSE

This course provides an overview of process systems automations, and control strategies and configurations. The focus is on applicatio and integration into the process and control of upstream and midstream oil and gas facilities. The material of the course is applicable to field production facilities, pipelines, gas plants, and offshore systems.
? Process systems operations and the key characteristics, and measurement needs, as well as
? Techniques to measure and control.
? Control modes and their applications, communications requirements, and the operator and Computer controller interface.
? Interrelationships between process, equipment, instruments and controls.
? Field (facility) control and monitoring systems such as pressure and level indicators and controllers.
? Field (facility) safety monitoring and response systems including SIS, HIPPS and emergency shutdown valves.
? System-wide considerations including communications, local control, remote control, and
? Data management and use.

WEEK 1.
COURSE CONTENT FOR AUTOMATION TRAINING.
1. Introduction to Automation
2. Brief History of PLC.
? Need and advantages of PLC.
? PLC Configurations.
? System Block diagram.
? PLC Classifications and types.
3. How PLC Works.
? General Architecture of PLC.
? Hardware details of PLC including front indications, terminals and ports on the modules.
? Brands of PLC to be treated.
? Allen-Bradley (RS 500 Micro-Logix).
? Siemens (S7-300).
? Omron (CPIE)
4. Fundamentals of PLC Programming.
? Programming units and using PC as programming unit, also Communication ports.
? Programming Languages and representation in FBD and LAD.
? Basic components and their symbols.
5. Understanding Relay concept.
? Relay wiring for logical gates.
6. Sensor: Actuator Concept for an associated process.

WEEK 2.
1. Siemens PLC (S7-300)
? Hardware and Software details.
? Front panel controls and communication details for S7-300 PLC.
? Selecting the operating mode for the S7-300 CPU.
? Specifications Capabilities of S7-300 PLC.
? Fixed Slots and Variable addressing for S7-300 PLC.
? Getting familiar with step 7 screens, options and navigation.
? Solving and developing Logic.
? Editing and modifying Ladder Logic Programs.
? Using Timers.
? Counters
? Flasher, using timers.
? Comparison Instructions.
? Mathematical Instructions
? Scaling analog values.
? Uploading and Downloading.
? Solving problems and software practice.
2. Allen-Bradley PLC (RS 500 Micro-Logix).
? Hardware and Software Details.
? Front panel controls and communication details.
? Selecting the operating mode for RS 500.
? Addressing of RS 500.
? Solving and Developing Logics.
? Editing and Modifying Logic Programs.
? Using Timers.
? Counters.
? Integers.
? Memory addressing.
? Float.
? Jump.
? Subroutine.
? Comparison.
? Control Reset (MCR).
? Swap (SWP).
? Uploading and Downloading.
? Solving Problems and Software Practice.
3. Omron PLC (CPIE).
? Hardware and Software details.
? Communication details.
? Selecting the Operating mode for CPIE.
? Addressing of Omron PLC.
? Developing Logics.
? Editing and Modifying Logic diagrams.
? Using Timers
? Counters
? Jump.
? Subroutine.
? Uploading and Downloading.
? Problems Solving and Software Practice.
4. Introduction to SCADA (Wonderware InTouch).
? Introduction to Wonderware InTouch SCADA Software.
? Applications of SCADA Software.
? Features of SCADA (Wonderware InTouch).




DATE:12th - 30th September 2016
DURATION: 3WEEKS
TIME: 9AM TO 1PM
COST: 80,000 (ON PROMO)



Venue: 14 Woji road rumuogba Port Harcourt
Website: www. hightechng. com
Phone: 234- 7035816455, 07012321020

72
INDUSTRIAL AUTOMATION AND DESIGN SYSTEMS
YOU WILL LEARN
? Defining what to measure, why a parameter measure and how to measure .
? Determining and using the many control strategies, equipment and computer systems common to an oil and gas facility.
? Identifying equipment and instrument characteristics and using appropriate instrumentation and controls.
? Defining and integrating components into systems that monitor and locally control the process
(and related equipment), safety systems, and the communications and remote control systems use.

ABOUT THE COURSE

This course provides an overview of process systems automations, and control strategies and configurations. The focus is on applicatio and integration into the process and control of upstream and midstream oil and gas facilities. The material of the course is applicable to field production facilities, pipelines, gas plants, and offshore systems.
? Process systems operations and the key characteristics, and measurement needs, as well as
? Techniques to measure and control.
? Control modes and their applications, communications requirements, and the operator and Computer controller interface.
? Interrelationships between process, equipment, instruments and controls.
? Field (facility) control and monitoring systems such as pressure and level indicators and controllers.
? Field (facility) safety monitoring and response systems including SIS, HIPPS and emergency shutdown valves.
? System-wide considerations including communications, local control, remote control, and
? Data management and use.

WEEK 1.
COURSE CONTENT FOR AUTOMATION TRAINING.
1. Introduction to Automation
2. Brief History of PLC.
? Need and advantages of PLC.
? PLC Configurations.
? System Block diagram.
? PLC Classifications and types.
3. How PLC Works.
? General Architecture of PLC.
? Hardware details of PLC including front indications, terminals and ports on the modules.
? Brands of PLC to be treated.
? Allen-Bradley (RS 500 Micro-Logix).
? Siemens (S7-300).
? Omron (CPIE)
4. Fundamentals of PLC Programming.
? Programming units and using PC as programming unit, also Communication ports.
? Programming Languages and representation in FBD and LAD.
? Basic components and their symbols.
5. Understanding Relay concept.
? Relay wiring for logical gates.
6. Sensor: Actuator Concept for an associated process.

WEEK 2.
1. Siemens PLC (S7-300)
? Hardware and Software details.
? Front panel controls and communication details for S7-300 PLC.
? Selecting the operating mode for the S7-300 CPU.
? Specifications Capabilities of S7-300 PLC.
? Fixed Slots and Variable addressing for S7-300 PLC.
? Getting familiar with step 7 screens, options and navigation.
? Solving and developing Logic.
? Editing and modifying Ladder Logic Programs.
? Using Timers.
? Counters
? Flasher, using timers.
? Comparison Instructions.
? Mathematical Instructions
? Scaling analog values.
? Uploading and Downloading.
? Solving problems and software practice.
2. Allen-Bradley PLC (RS 500 Micro-Logix).
? Hardware and Software Details.
? Front panel controls and communication details.
? Selecting the operating mode for RS 500.
? Addressing of RS 500.
? Solving and Developing Logics.
? Editing and Modifying Logic Programs.
? Using Timers.
? Counters.
? Integers.
? Memory addressing.
? Float.
? Jump.
? Subroutine.
? Comparison.
? Control Reset (MCR).
? Swap (SWP).
? Uploading and Downloading.
? Solving Problems and Software Practice.
3. Omron PLC (CPIE).
? Hardware and Software details.
? Communication details.
? Selecting the Operating mode for CPIE.
? Addressing of Omron PLC.
? Developing Logics.
? Editing and Modifying Logic diagrams.
? Using Timers
? Counters
? Jump.
? Subroutine.
? Uploading and Downloading.
? Problems Solving and Software Practice.
4. Introduction to SCADA (Wonderware InTouch).
? Introduction to Wonderware InTouch SCADA Software.
? Applications of SCADA Software.
? Features of SCADA (Wonderware InTouch).




DATE:12th - 30th September 2016
DURATION: 3WEEKS
TIME: 9AM TO 1PM
COST: 80,000 (ON PROMO)



Venue: 14 Woji road rumuogba Port Harcourt
Website: www. hightechng. com
Phone: 234- 7035816455, 07012321020

73
UPDATED FOR SEPTEMBER 2016


High-Tech IT and Engineering is now the official partner of SMEC LAB a division of SMEC AUTOMATION INDIA (ISO 9001:2008 Certified) on Instrumentation and Control Engineering training in Nigeria.
For your world class hands on skill Instrumentation and Control Engineering training with internationally recognized certificate call on us now.
BENEFIT OF TRAINING WITH US
(1) Training s are purely hands on skill as outlined in the course content
(2) Our certificate is internationally recognized
(3) We partner with some of the industrial major player like Schneider Electric etc
(4) Free job consultancy and placement
(5) Free accommodation for our international courses
(6) 10% discount on our international course
(7) We help you process your visa and flight on request.




Date: 12TH - 30TH SEPTEMBER 2016
Time: 1pm - 4pm & 5pm - 8pm Respectively daily
EXAMINATION and CERTIFICATION

COST: 65,000 (COST COVERS MATERIALS,TRAINING AND CERTIFICATE)

NB: COMFORTABLE ACCOMMODATION COULD BE ARRANGED AT 3,000 PER DAY FOR CLIENTS

TEL: 07035816455
BBM: 7E36F937
EMAIL: info@hightechng.com
www.hightechng.com

YOU WILL LEARN
Instrumentation and Control
? Defining what to measure, why a parameter measure and how to measure.

? Determining and using the many control strategies, equipment and computer systems common to an oil and gas facility.

? Identifying equipment and instrument characteristics and using appropriate instrumentation and controls.

? Defining and integrating components into systems that monitor and locally control the process (and related equipment), safety systems, and the communications and remote control systems use.

ABOUT THE COURSE
This course provides an overview of process systems instrumentation, and control strategies and configurations. The focus is on application and integration into the process and control of upstream and midstream oil and gas facilities. The material of the course is applicable to field production facilities, pipelines, gas plants, and offshore systems.
? Process systems operations and the key characteristics, and measurement needs, as well as

? Techniques to measure and control.

? Control modes and their applications, communications requirements, and the operator and

? Computer controller interface.

? Interrelationships between process, equipment, instruments and controls.

? Field (facility) control and monitoring systems such as pressure and level indicators and controllers.

? Field (facility) safety monitoring and response systems including SIS, HIPPS and emergency shutdown valves.

? System-wide considerations including communications, local control, remote control, and

? Data management and use.


COURSE CONTENT

GENERAL MODULE 1:
Safety in Oil and Gas
Subsurface oil and gas activities Overview
Oil and Gas definitions from origin -modern day Drilling technology (video)
Reservoir analysis and in-put to process engineering (video)

GENERAL MODULE 2:
Overview of typical Onshore and Offshore oil and Gas processing facility - Onshore Oil processing system units
Wellhead
Flow lines
Inlet manifold
Separators ? detailed operating system demonstration ? (video)
Surge vessel
LACT unit
Export pumps



- Overview of Crude Oil tank farm
- Oily water treatment units


GENERAL MODULE 3:
Offshore Oil and Gas facilities Overview
INSTRUMENT MODULES:
Understanding Instrumentation, control and automation engineering
? Understanding Conceptual Engineering, Front End Engineering Design, Detailed Engineering Design and Process deliverable sessions for optimal design

? In-country Oil & Gas Regulations, International Codes & Standards, Specifications, Recommended Practices, Publications, Bulletins & Technical Reports

? Introduction to instrument components and piping related components

? Valve types and function (manual and controlled)

? Identifying general process and safety device Symbols

? Understanding ICA (Instrumentation /Controls and automation) interface with Process engineering and Mechanical Piping o Understanding a PI& using the Legend Sheet

? Typical oil industry pipe sizes
? Pressure Rating
? What is valve tagging?
? Flow direction symbols
? Understanding Operating and design P, V, T data
Site Visit Activities
? Understanding and capturing requirement from a typical Project Scope prior to site visit
? How to prepare a Check List and Site Visit Report

Generating IC&A and Process Interface drawings -Generating SAFE chart (Practice exercise)
? Generating a Block diagram e.g. SDV Panel Block Diagram (Practice exercise)

? Generating Tie-in Schematics e.g. Main Control Panel/Gas Lift Panel

? Generating IC&A and Piping interface drawings
? Generating Level Indicator Hook-up Details
? Generating Flow meter Installation Details
? Generating Pressure Indicator Hook-up details
? Generating Pressure Temperature Indicator Hook-up
? Generating Pressure Level Switch Installation Details
? Generating Pressure LIC/LV Installation Details
? Generating Pressure PC/PCV Installation Details
? Generating Pressure PSH/PSL/PI Installation Details
? Generating Pressure Shutdown Valve Installation Details
? Generating Pressure Chart Recorder - Mounting Detail

PLC & IL
PLC
? Understanding the actual meaning of PLC
? Importance of PLC in IC&A design works for oil & gas sector
? Logics as regards to designs for control panels and other related automated cubicles
? Help out in the programming of PLCs and know whatever information required by the manufacturers
? Understand various programming languages of the PLC in line with IEC- 61131-3
? Knowing what input and output devices and other PLC/PAC Equipment
? Knowing how the PLC communication concept, e.g the Ethernet, master slave networks, RTU/DCS/HMI interfaces, Drivers, etc.
? Understanding Human-machine interface functions


Generating Instrument lists (IL)
? Definition of Instrument list
? To understand the purpose of having an instrument list
? To effectively read and interpret the Instrument list
? To know the composition of Instrument list

Overview of Instrument unit installation

? To understand the use of installation details in instrumentation
? To understand and extract the materials for construction
? To effectively read and recognize the various valves, tubing and cablings
? Involved in the various installation details
? To understand how to extract material take off or Bill of materials from
? To read and analyze various Installation details



Field Instrumentation
? Understanding instrument unit Location Plan
? To understand the use of location plans or layouts in instrumentation
? To understand and read location plans for detection of equipment on Plans
? Generating instrument Loop diagrams
? To understand the use of Loop Diagrams in instrumentation
? To generate loop Diagrams from the P&IDs
? To effectively read and recognize the various valves, tubing?s and cablings Involved in the Loop Diagrams
? To understand every connections or interrelationships involved in loop Diagrams
? To read and analyze various Loop Diagrams.
? Generating instrument tubing and Tray layout e.g. using Equipment layout drawing

DCS Initiative
? Understanding the DCS initiatives
? Introduction to DCS
? Evolution from DCS to Smaller hybrid systems, large Enterprise-wide systems, and so called open control Systems
? Comparing DCS to traditional single-loop, central computer, PLC, PAC, PC, and SCADA architectures, along with fiber-optic, wireless, multiple field buses, Safety systems and security issues.

Fundamentals of SIF Workshop in safe oil and Gas Operations -SIL Classification
? Introduction to Safety Analysis and System Design
? Protection Concepts and Safety Analysis

Date: 12TH - 30TH SEPTEMBER 2016
Time: 1pm - 4pm & 5pm - 8pm Respectively daily
EXAMINATION and CERTIFICATION

COST: 65,000 (PROMO COST AND IT COVERS MATERIALS,TRAINING AND CERTIFICATE)


NB: COMFORTABLE ACCOMMODATION COULD BE ARRANGED AT 3,000 PER DAY FOR CLIENTS

TEL: 07035816455
BBM: 7E36F937
EMAIL: info@hightechng.com
www.hightechng.com

74
UPDATED FOR SEPTEMBER 2016


High-Tech IT and Engineering is now the official partner of SMEC LAB a division of SMEC AUTOMATION INDIA (ISO 9001:2008 Certified) on Instrumentation and Control Engineering training in Nigeria.
For your world class hands on skill Instrumentation and Control Engineering training with internationally recognized certificate call on us now.
BENEFIT OF TRAINING WITH US
(1) Training s are purely hands on skill as outlined in the course content
(2) Our certificate is internationally recognized
(3) We partner with some of the industrial major player like Schneider Electric etc
(4) Free job consultancy and placement
(5) Free accommodation for our international courses
(6) 10% discount on our international course
(7) We help you process your visa and flight on request.




Date: 12TH - 30TH SEPTEMBER 2016
Time: 1pm - 4pm & 5pm - 8pm Respectively daily
EXAMINATION and CERTIFICATION

COST: 65,000 (COST COVERS MATERIALS,TRAINING AND CERTIFICATE)

NB: COMFORTABLE ACCOMMODATION COULD BE ARRANGED AT 3,000 PER DAY FOR CLIENTS

TEL: 07035816455
BBM: 7E36F937
EMAIL: info@hightechng.com
www.hightechng.com

YOU WILL LEARN
Instrumentation and Control
? Defining what to measure, why a parameter measure and how to measure.

? Determining and using the many control strategies, equipment and computer systems common to an oil and gas facility.

? Identifying equipment and instrument characteristics and using appropriate instrumentation and controls.

? Defining and integrating components into systems that monitor and locally control the process (and related equipment), safety systems, and the communications and remote control systems use.

ABOUT THE COURSE
This course provides an overview of process systems instrumentation, and control strategies and configurations. The focus is on application and integration into the process and control of upstream and midstream oil and gas facilities. The material of the course is applicable to field production facilities, pipelines, gas plants, and offshore systems.
? Process systems operations and the key characteristics, and measurement needs, as well as

? Techniques to measure and control.

? Control modes and their applications, communications requirements, and the operator and

? Computer controller interface.

? Interrelationships between process, equipment, instruments and controls.

? Field (facility) control and monitoring systems such as pressure and level indicators and controllers.

? Field (facility) safety monitoring and response systems including SIS, HIPPS and emergency shutdown valves.

? System-wide considerations including communications, local control, remote control, and

? Data management and use.


COURSE CONTENT

GENERAL MODULE 1:
Safety in Oil and Gas
Subsurface oil and gas activities Overview
Oil and Gas definitions from origin -modern day Drilling technology (video)
Reservoir analysis and in-put to process engineering (video)

GENERAL MODULE 2:
Overview of typical Onshore and Offshore oil and Gas processing facility - Onshore Oil processing system units
Wellhead
Flow lines
Inlet manifold
Separators ? detailed operating system demonstration ? (video)
Surge vessel
LACT unit
Export pumps



- Overview of Crude Oil tank farm
- Oily water treatment units


GENERAL MODULE 3:
Offshore Oil and Gas facilities Overview
INSTRUMENT MODULES:
Understanding Instrumentation, control and automation engineering
? Understanding Conceptual Engineering, Front End Engineering Design, Detailed Engineering Design and Process deliverable sessions for optimal design

? In-country Oil & Gas Regulations, International Codes & Standards, Specifications, Recommended Practices, Publications, Bulletins & Technical Reports

? Introduction to instrument components and piping related components

? Valve types and function (manual and controlled)

? Identifying general process and safety device Symbols

? Understanding ICA (Instrumentation /Controls and automation) interface with Process engineering and Mechanical Piping o Understanding a PI& using the Legend Sheet

? Typical oil industry pipe sizes
? Pressure Rating
? What is valve tagging?
? Flow direction symbols
? Understanding Operating and design P, V, T data
Site Visit Activities
? Understanding and capturing requirement from a typical Project Scope prior to site visit
? How to prepare a Check List and Site Visit Report

Generating IC&A and Process Interface drawings -Generating SAFE chart (Practice exercise)
? Generating a Block diagram e.g. SDV Panel Block Diagram (Practice exercise)

? Generating Tie-in Schematics e.g. Main Control Panel/Gas Lift Panel

? Generating IC&A and Piping interface drawings
? Generating Level Indicator Hook-up Details
? Generating Flow meter Installation Details
? Generating Pressure Indicator Hook-up details
? Generating Pressure Temperature Indicator Hook-up
? Generating Pressure Level Switch Installation Details
? Generating Pressure LIC/LV Installation Details
? Generating Pressure PC/PCV Installation Details
? Generating Pressure PSH/PSL/PI Installation Details
? Generating Pressure Shutdown Valve Installation Details
? Generating Pressure Chart Recorder - Mounting Detail

PLC & IL
PLC
? Understanding the actual meaning of PLC
? Importance of PLC in IC&A design works for oil & gas sector
? Logics as regards to designs for control panels and other related automated cubicles
? Help out in the programming of PLCs and know whatever information required by the manufacturers
? Understand various programming languages of the PLC in line with IEC- 61131-3
? Knowing what input and output devices and other PLC/PAC Equipment
? Knowing how the PLC communication concept, e.g the Ethernet, master slave networks, RTU/DCS/HMI interfaces, Drivers, etc.
? Understanding Human-machine interface functions


Generating Instrument lists (IL)
? Definition of Instrument list
? To understand the purpose of having an instrument list
? To effectively read and interpret the Instrument list
? To know the composition of Instrument list

Overview of Instrument unit installation

? To understand the use of installation details in instrumentation
? To understand and extract the materials for construction
? To effectively read and recognize the various valves, tubing and cablings
? Involved in the various installation details
? To understand how to extract material take off or Bill of materials from
? To read and analyze various Installation details



Field Instrumentation
? Understanding instrument unit Location Plan
? To understand the use of location plans or layouts in instrumentation
? To understand and read location plans for detection of equipment on Plans
? Generating instrument Loop diagrams
? To understand the use of Loop Diagrams in instrumentation
? To generate loop Diagrams from the P&IDs
? To effectively read and recognize the various valves, tubing?s and cablings Involved in the Loop Diagrams
? To understand every connections or interrelationships involved in loop Diagrams
? To read and analyze various Loop Diagrams.
? Generating instrument tubing and Tray layout e.g. using Equipment layout drawing

DCS Initiative
? Understanding the DCS initiatives
? Introduction to DCS
? Evolution from DCS to Smaller hybrid systems, large Enterprise-wide systems, and so called open control Systems
? Comparing DCS to traditional single-loop, central computer, PLC, PAC, PC, and SCADA architectures, along with fiber-optic, wireless, multiple field buses, Safety systems and security issues.

Fundamentals of SIF Workshop in safe oil and Gas Operations -SIL Classification
? Introduction to Safety Analysis and System Design
? Protection Concepts and Safety Analysis

Date: 12TH - 30TH SEPTEMBER 2016
Time: 1pm - 4pm & 5pm - 8pm Respectively daily
EXAMINATION and CERTIFICATION

COST: 65,000 (PROMO COST AND IT COVERS MATERIALS,TRAINING AND CERTIFICATE)


NB: COMFORTABLE ACCOMMODATION COULD BE ARRANGED AT 3,000 PER DAY FOR CLIENTS

TEL: 07035816455
BBM: 7E36F937
EMAIL: info@hightechng.com
www.hightechng.com

75
WEDNESDAY JOBS POSTING / QA/QC Management & Engineering
« on: September 07, 2016, 10:19:55 AM »
UPDATED FOR SEPTEMBER 2016

COURSE OUTLINE

Course description
This course focuses on both the management of product quality and the management of the process quality for creating project deliverables. It provides exposure to the tools, techniques, and metrics used to ensure that sufficient product and process quality is achieved. It includes assignments which allow participants to learn how to plan quality into a project and determine key metrics to manage project and process quality.
Who should attend ?
This course is primarily designed for engineers, project managers and supervisors, quality control and quality assurance personnel and anyone with interest in quality planning, control and supervision. This includes exposure to basic project management techniques such as scope, activity, and resource planning.
What you will achieve


An understanding of the relationship among quality planning, quality assurance, and quality control
An understanding of numerous tools and techniques which can be used to monitor and improve quality
The ability to develop and track key quality metrics to satisfy customer needs
The ability to determine process metrics to maintain quality standards
An understanding of the responsibilities of senior management, the project manager, and project team members to ensure the existence of an adequate quality management process



What you will learn


Roles and Responsibilities of QA / QC Engineer
Project Quality Management Principles
Tools for Project Quality Management
Models for Continuous Quality Improvement of the Project Management Process
Product Quality vs. Process Quality
Introduction to ISO 9001 . ISO 9004 , ISO 14000. ISO 19011
International Codes and Standards
Control of Nonconforming of Items / Products
Preparation of Project Quality Plan
Preparation of Inspection Test Plans ? ITPs
Final QA / QC Documentation




DATE: 12TH - 23RD SEPTEMBER 2016
DURATION: 2WEEKS
TIME: 11am - 1pm
COST: 40,000 (PROMO COST)

Call: 07035816455 for booking
Location: 14 Woji road rumuogba Port Harcourt

www.hightechng.com or email info@hightechng.com

Pages: 1 2 [3] 4 5 ... 22

Enter Your Email Below For Daily Jobs Updates, It's Free

100% Free