Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - geoken

Pages: [1] 2 3 4
1
CAREER / Professional Training courses for Engineers & Geologists
« on: June 25, 2020, 10:10:36 AM »
WELCOME TO PIPING DESIGN, SEISMIC AND ENGINEERING TRAINING PROGRAM…
This program offers the following training which are relevant for students, graduates,Nysc,  workers, etc in today’s market.
1.  Piping Design (PDMS)
2.  Seismic & Well logging (Reservoir Estimation)
3.  Computer Aided Design(AutoCAD)
4.  Process Engineering Principles and Design (Hysys)
5.  Piping and Instrumentation Design (P&id)
 6.   Drilling & Completion Technology
7.   Groundwater Exploration to determine depth of aquifer
The whole training is a package that intends to produce experts in Process/Piping Engineering design, Seismic/Well logging interpretation etc. 
Process Engineering and Design course is unique.  It begins by discussing the design of processes for desired physical and/ or chemical transformation of materials.  The design starts at a conceptual level and ultimately ends in the form of fabrication and construction of plants.  Processes include many unit operations which change raw materials into finished products using physical and/or chemical means.
Several design materials including real life design documents and software applications shall be made available to participants.  The Process engineering design focus of this academy is the one relating to oil and gas fluid processing.  The unit operations shall be the ones used in the surface facilities of oil and gas plants.

For enquire/registration for any of the above courses call: 08060360538/08028553955
www.  geo-kentech. comclick on training/consulting and fill the
registration form or send email to          info@geo-kentech. com
Mode of Training= Online/Classroom

2
TRAINING & CAREER OPPORTUNITY ON ENGINEERING DESIGN, PIPING & RESERVOIR MODELING
GeokenTech:is using this medium to invite suitable person for the following oil/gas &Engineering design soft skills training, listed below are courses offer:
                                                             
                                                      Oil & Gas Courses
?   ENGINEERING DESIGN (AUTOCAD)---------    MECHANICAL, CIVIL, ELECTRICAL, CHEMICAL ENGINEERING

?   PIPING DESIGN (PDMS & P&ID) --------MECHANICAL.  PROCESS/CHEMICAL, ELECTRICAL ENGINEERING

?   ASPEN HYSYS----                              CHEMICAL, PROCESS ENGINEERING

?   PETREL SCHLUMBEGER (SEISMIC/WELL LOGGING)?GEOLOGISTS, GEOPHYSICISTS, PETROLEUM ENGINEERING, WELL SITE ENGINEERS

?   GROUNDWATER EXPLORATION/GEOTECHNICAL SURVEY-----GEOLOGIST, GEOTECHNICAL PERSONAL, HYDROGEOLOGIST/WATER ENGINEERS

VISIT OUR SITE 4 REGISTRATION: www. geo-kentech. com
              Email: info@geo-kentech. com
Geoken:  08060360538/08028553955
Register for course & view course module on our site by clicking on training/consulatncy
     :Geoken Tech Services Nig Ltd (GTB:  0449059686)

TRAINING CENTRES: SEBUFF PLAZA, JAKANDE ROUNDABOUT, LEKKI- OSAPA,
                                         LAGOS
MAINLAND CENTRE: KAZAM PLAZA, COLLEGE BUSTOP, IKOTUN-LAGOS

3
WEDNESDAY JOBS POSTING / TRAINING FOR GEOLOGISTS, ENGINEERS IN LAGOS
« on: January 16, 2019, 06:17:55 PM »
TRAINING & CAREER OPPORTUNITY ON ENGINEERING DESIGN, PIPING & RESERVOIR MODELING
GeokenTech:is using this medium to invite suitable person for the following oil/gas &Engineering design soft skills training, listed below are courses offer:
?   ENGINEERING DESIGN (AUTOCAD)---------    MECHANICAL, CIVIL, ELECTRICAL, CHEMICAL ENGINEERING

?   PIPING DESIGN (PDMS & P&ID) --------MECHANICAL.  PROCESS/CHEMICAL, ELECTRICAL ENGINEERING

?   ASPEN HYSYS----CHEMICAL, PROCESS ENGINEERING

?   PETREL SCHLUMBEGER (SEISMIC/WELL LOGGING)?GEOLOGISTS, GEOPHYSICISTS, PETROLEUM ENGINEERING, WELL SITE ENGINEERS

?   GROUNDWATER EXPLORATION/GEOTECHNICAL SURVEY-----GEOLOGIST, GEOTECHNICAL PERSONAL, HYDROGEOLOGIST/WATER ENGINEERS

VISIT OUR SITE 4 REGISTRATION: www. geo-kentech. com
  Email: info@geo-kentech. com
Geoken:  08060360538/08028553955
Register for course by making payment to:
            Geoken Tech Services Nig Ltd (GTB: 0449059686)
N:B: Training for 2019 session is to commence on 21st, Dec 2019
TRAINING CENTRES: SEBUFF PLAZA, JAKANDE ROUNDABOUT, LEKKI- OSAPA,
                                         LAGOS
MAINLAND CENTRE: KAZAM PLAZA, COLLEGE BUSTOP, IKOTUN-LAGOS

4
Geoken Tech:is using this medium to advite suitable person for the following oil/gas & Engineeringdesign soft skills training, listed below are courses offer:
1.    ENGINEERING DESIGN (AUTOCAD)---------    MECHANICAL, CIVIL, ELECTRICAL, CHEMICAL ENGINEERING

2.    PIPING DESIGN (PDMS & P&ID) --------MECHANICAL.  PROCESS/CHEMICAL, ELECTRICAL ENGINEERING

3.    ASPEN HYSYS----CHEMICAL, PROCESS ENGINEERING

4.    PETREL SCHLUMBEGER (SEISMIC/WELL LOGGING)?GEOLOGISTS, GEOPHYSICISTS, PETROLEUM ENGINEERING, WELL SITE ENGINEERS

5.    GROUNDWATER EXPLORATION/GEOTECHNICAL SURVEY-----GEOLOGIST, GEOTECHNICAL PERSONAL, HYDROGEOLOGIST/WATER ENGINEERS

CALL : GEOKENTECH ( 08060360538/08028553955
VISIT OUR SITE 4 REGISTRATION: www. geo-kentech. com
TRAINING FOR COMMENCE ON MON, 12TH NOVEMBER, 2018
NB: TRAINEE WILL BE SEND TO INDUSTRIES FOR CONTRACT IN DANGOTE REFINERY ON GOING PROJECT


5
JOB and CAREERS Discussion / TRAINING & JOB OPPORTUNITY ON PIPING DESIGN
« on: October 25, 2018, 04:48:12 PM »
PLANT DESIGN MANAGEMENT SYSTEM (PDMS)
Plant Design Management System (PDMS) is an Engineering Design Software used to model a complete Facility from Foundation level to the Equipment level, Structural level, and as well as Pipe routing.
This course is ideal for the Designers who are willing to learn or enhance the  skills about 3D Plant Designing.  Other Oil and gas courses offer by Geoken Tech
1.    AUTOCAD (2D/3D)
2.    PETREL (SEISMIC & WELL LOGGING)
3.    HYSYS

Target Audience:

Fresher and Experienced candidates from:
1.  Mech.  / chemical / Petro-chemical engineering
2.  Those who want a brighter Piping career.
3.  Persons form Plant Engineering other than Design
Certification:
After completing the PDMS training course, students receive a training certificate from Geoken Tech.


PDMS - PIPING COURSE MODULE
?   Introduction to PDMS
?   
?   PDMS usage and application
?   
?   History of PDMS
?   PDMS Working hierarchy
?   PDMS Administrator, PDMS Designer, PDMS Engineer - roles
?   PDMS GUI Introduction
?   PDMS Mouse button operations and shortcut Keys
?   PDMS Methodology of working
?   Equipment Modeling
?   Introduction to equipment?s  Modeling
?   Types of equipment?s available in PDMS
?   Methodology of approach in Equipment Modeling
?   Create equipment?s using Primitives
?   Modify Equipment?s created by Primitives
?   Equipment Modeling- Create equipment?s using Parametric Method
?   Manipulating Parametric equipment?s
?   Create various equipment?s in Equipment Modeling
?   Creating obstructions
?   Equipment commands.  Setting the obstructions
?   Equipment Modeling - Equipment Modeling with standards
?   Nozzle Manipulation
?   Equipment Modeling-Modeling of Horizontal Vessel
?   Modeling of Vertical Vessel
?   Modeling of Heat Exchanger
?   Modeling of Pumps
?   Modeling of Stacked Heat Exchanger
?   Creating the standard equipment?s
?   Modify commands-Introduction
?   Rotate, Mirror, Offset
?   Piping Modeling - Introduction to piping Modeling in PDMS
?   Hierarchy of piping in PDMS
?   Methodology of approach in Piping Modeling
?   Role & Responsibility of PDMS Administrator
?   Introduction to Standards and Specs
?   Piping Modeling-Pipe routing- As per piping layout and P&ID


For Registration Contact: Geoken:08060360538 / 08028553955
www. geo-kentech. com
info@geo-kentech. com
Training Centers: Sebuff Plaza, Suite 59, jakande roundabout, Lekki Expressway
Mainland Office: Kazam Plaza, suite 15, College Bustop, Ikotun- Lagos


 PLANT DESIGN WITH PDMS, SHOWING PIPES ROUTING, EQUIPMENTS&STRUCTURES



6
CAREER / TRAINING FOR GEOLOGISTS, ENGINEERS , NYSC MEMBERS IN LAGOS
« on: September 25, 2018, 06:38:45 PM »
            GEOKEN TECH SERVICES TRAINING COURSES
Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software?s, listed below are courses offer by Geoken Tech Services Nig Ltd.
                       COURSES                                                     TARGET AUDIENCE
1.    AUTOCAD (2D/3D)-Engineering design/drafting -----Mechanical, Civil, Electrical.  Engineering,
                                                                                            NYSC, Graduates trainee, Chemical engineers

                       AUTOCAD MODULE
?   Introduction to AutoCAD 2d Toolbar/Understanding AutoCAD Interface
?   Application of Tools bar( draw, modify, object snap, Properties, Status, Command)
?   Setting AutoCAD drawing Limits
?   Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc
?   Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc)
?   Introduction to Isometric drawing
?   Drawing, dimensioning and editing Isometric drawing
?   Introduction to AUTOCAD 3D
?   AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style)
?   Creating solid object with AutoCAD 3d tools
?   Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools
?   Rendering of Solid objects



2.    PIPING DESIGN (PLANT DESIGN MANAGEMENT SYSTEM)PDMS------Mechanical, Process, NYSC
                                                                                                                        Chemical, Civil, Industrial 


                                       PDMS MODULE
?   Introduction to Piping design & Specification
?   PDMS (Plant design management system) basics
Introduction to Plant equipment?s type
?   Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler,
?   Fractionating columns.
?   Taking coordinate/Equipment  position from plant plan drawing (GAD)
?   Using the Primitive method to design equipment?s
?   Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole)
?   Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange,
?   Gasket)  etc
?   Piping Isometric
?   
?   Develop equipment modeling, pipe modeling, structure modeling
Piping Setting
?   Pipe specification in PDMS
?   Pipe Routing (Linking equipment?s with pipes)
?   Modifying the Head/Tail of a Pipe
?   Supporting Plant with Structures (Beams, Columns, Slab)



3.  PETREL (SEISMIC INTERPRETATION, WELL LOGGING & RESERVOIR ESTIMATION)- Geologist,
                                                                                Petroleum, Reservoir Personal, Geophysicists,
                                                                               Trainee, NYSC Members

                                    MODULE

Basic theory of seismic reflection prospecting method in oil and gas.
  Petrel Introduction & Interface


?Different types of well logs and their uses.
?Loading of 3D seismic reflection data, making Surfaces & Horizon
Seismic Visualization & QC
?Picking of faults (Importing fault data/Fault modeling)
?Loading of well logs

Importing well heads, well deviation & well tops
?Seismic-to-well tie using synthetic seismogram
?Mapping of reservoirs tops and base
? Generation of depth structures map using check shot data.
?Calculation of petro physical parameters
?Generation of various attributes maps
?   Volumetric
?Identification of prospects.



PROCESS DESIGN & OPTIMIZATION ( HYSYS)-------------------------Chemical/Process/Industrial Personal
                                                                                                                   NYSC Menbers, Graduate trainee

             HYSYS COURSE MODULE

?Introduction to Aspen Hysys
?Hysys working Environment
?Adding component to workflow
?Adding Fluid package
?Entering Hysys Simulation Environment
?Adding material and Energy stream
?Building Simulation
?Analyze the Property Using case Study
?Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash
Separators)
?Equilibrium Reaction
?Working on Hysys Project

5.        PIPING & INSTRUMENTATION DESIGN (P&ID) --------Mechanical, Chemical Electrical Engineering
                                                                                                           Graduates trainee, NYSC Members

                                                   COURSE MODULE

?   Introduction to P&ID workspace
?   P&ID Tools Palette
?   Creating a New P&ID Project
?   Inserting equipment?s (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space
?   Connecting equipment?s together with Process line
?   Assigning Tags to equipment?s and Specification to process lines
?   Placing control instruments to process lines, equipment?s and on control valves
?   Checking for Errors by running validation

6.       DRILLING & COMPLETION/PETROLEUM TECHNOLOGY:  Petroleum, Industrial, Chemical Personal,
                                                                                                             Geologist, NYSC, Graduates trainee

                                                     COURSE MODULE
?   Introduction to Petroleum Industry
?   Introduction to Drilling Technology
?   Drilling Rigs & Rig equipment?s
?   Drilling Practices
?   Borehole instability & common drilling problems
?   Well site Geological survey
?   Drilling Fluids Technology
?   Directional drilling
?   Casing Technologies

7.   GEOPHYSICAL /GEOTECHNICAL SURVEY TRAINING ----- Geologist, Hydro geologist, Water, NYSC,
                                                                                                       Geophysicist graduate/trainee

CONTACT: GEOKEN TECH (08060360538/08028553955), kengeotech@yahoo. com
Island Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway
Mainland:    Kazam Plaza, Suite 15, Opposite Domino Pizza, College Bustop,    Ikotun- Lagos.

                                                                                                   


7
            GEOKEN TECH SERVICES TRAINING COURSES
Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software?s, listed below are courses offer by Geoken Tech Services Nig Ltd.
                       COURSES                                                     TARGET AUDIENCE
1.    AUTOCAD (2D/3D)-Engineering design/drafting -----Mechanical, Civil, Electrical.  Engineering,
                                                                                            NYSC, Graduates trainee, Chemical engineers

                       AUTOCAD MODULE
?   Introduction to AutoCAD 2d Toolbar/Understanding AutoCAD Interface
?   Application of Tools bar( draw, modify, object snap, Properties, Status, Command)
?   Setting AutoCAD drawing Limits
?   Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc
?   Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc)
?   Introduction to Isometric drawing
?   Drawing, dimensioning and editing Isometric drawing
?   Introduction to AUTOCAD 3D
?   AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style)
?   Creating solid object with AutoCAD 3d tools
?   Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools
?   Rendering of Solid objects



2.    PIPING DESIGN (PLANT DESIGN MANAGEMENT SYSTEM)PDMS------Mechanical, Process, NYSC
                                                                                                                        Chemical, Civil, Industrial 


                                       PDMS MODULE
?   Introduction to Piping design & Specification
?   PDMS (Plant design management system) basics
Introduction to Plant equipment?s type
?   Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler,
?   Fractionating columns.
?   Taking coordinate/Equipment  position from plant plan drawing (GAD)
?   Using the Primitive method to design equipment?s
?   Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole)
?   Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange,
?   Gasket)  etc
?   Piping Isometric
?   
?   Develop equipment modeling, pipe modeling, structure modeling
Piping Setting
?   Pipe specification in PDMS
?   Pipe Routing (Linking equipment?s with pipes)
?   Modifying the Head/Tail of a Pipe
?   Supporting Plant with Structures (Beams, Columns, Slab)



3.  PETREL (SEISMIC INTERPRETATION, WELL LOGGING & RESERVOIR ESTIMATION)- Geologist,
                                                                                Petroleum, Reservoir Personal, Geophysicists,
                                                                               Trainee, NYSC Members

                                    MODULE

Basic theory of seismic reflection prospecting method in oil and gas.
  Petrel Introduction & Interface


?Different types of well logs and their uses.
?Loading of 3D seismic reflection data, making Surfaces & Horizon
Seismic Visualization & QC
?Picking of faults (Importing fault data/Fault modeling)
?Loading of well logs

Importing well heads, well deviation & well tops
?Seismic-to-well tie using synthetic seismogram
?Mapping of reservoirs tops and base
? Generation of depth structures map using check shot data.
?Calculation of petro physical parameters
?Generation of various attributes maps
?   Volumetric
?Identification of prospects.



PROCESS DESIGN & OPTIMIZATION ( HYSYS)-------------------------Chemical/Process/Industrial Personal
                                                                                                                   NYSC Menbers, Graduate trainee

             HYSYS COURSE MODULE

?Introduction to Aspen Hysys
?Hysys working Environment
?Adding component to workflow
?Adding Fluid package
?Entering Hysys Simulation Environment
?Adding material and Energy stream
?Building Simulation
?Analyze the Property Using case Study
?Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash
Separators)
?Equilibrium Reaction
?Working on Hysys Project

5.        PIPING & INSTRUMENTATION DESIGN (P&ID) --------Mechanical, Chemical Electrical Engineering
                                                                                                           Graduates trainee, NYSC Members

                                                   COURSE MODULE

?   Introduction to P&ID workspace
?   P&ID Tools Palette
?   Creating a New P&ID Project
?   Inserting equipment?s (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space
?   Connecting equipment?s together with Process line
?   Assigning Tags to equipment?s and Specification to process lines
?   Placing control instruments to process lines, equipment?s and on control valves
?   Checking for Errors by running validation

6.       DRILLING & COMPLETION/PETROLEUM TECHNOLOGY:  Petroleum, Industrial, Chemical Personal,
                                                                                                             Geologist, NYSC, Graduates trainee

                                                     COURSE MODULE
?   Introduction to Petroleum Industry
?   Introduction to Drilling Technology
?   Drilling Rigs & Rig equipment?s
?   Drilling Practices
?   Borehole instability & common drilling problems
?   Well site Geological survey
?   Drilling Fluids Technology
?   Directional drilling
?   Casing Technologies

7.   GEOPHYSICAL /GEOTECHNICAL SURVEY TRAINING ----- Geologist, Hydro geologist, Water, NYSC,
                                                                                                       Geophysicist graduate/trainee

CONTACT: GEOKEN TECH (08060360538/08028553955), kengeotech@yahoo. com
Island Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway
Mainland:    Kazam Plaza, Suite 15, Opposite Domino Pizza, College Bustop,    Ikotun- Lagos.

8
EXPLORATION, DRILLING & PRODUCTION COURSES/TRAINING
GeokenTech: offer courses in the area of drilling, completion, Exploration and Reservoir Simulation/Engineering.  Our expertise covers all sections of the oil & gas
Industry, Exploration and Production, Safety, Reservoir simulation.
COURSE 1: DRILLING, COMPLETION & PRODUCTION TECHNOLOGY
   MODULES (WELL DESIGN)
                                            Week 1
?   Introduction to Petroleum Industry
?   Introduction to Drilling Technology
?   Drilling Rigs &Rig Equipment?s
?   Drilling Engineering, Geology & Reservoir
?   Drilling bits classification & Technologies
?   Drilling Practices & operation
?   Drilling Problems, practices & Operations
?   Casing Design           
Week 2
 DRILLING FLUID TECHNOLOGY, WELL COMPLETION & PRODUCTION
?   Drilling Fluids & Well control
?   Drilling Fluids & Cement Technologies, Practices
?   Well completion Engineering
?   Well testing, Drill stem test
?   Wire line logging
Target Audience: Petroleum, Chemical, Mechanical Engineering personal, Geologists, Young engineers involved in drilling and completion, tool pusher, Supervisor, NYSC Members.
Course Fee: #50,000. 00
COURSE 2:     RESERVOIR ENGINEERING & PETROPHYSICS
                                                       Week 1
?   Introduction to Reservoir Engineering
?   Reservoir characterization from seismic to production  & Logging Interpretation
?   Reservoir management
?   Reservoir fluids properties
?   Reservoir for Petroleum Engineers/Geologists
                                            Week 2
?   Basic Geophysics
?   Seismic acquisition and data processing
?   2D/3D Seismic Interpretation
?   Introduction to Petrel ( Basics)
?   Fundamentals of Petro physics
?   Rock Mechanics
?   Wire line log Interpretation
?   Wire line formation testing and Interpretation
Target Audience: Petroleum Engineers, graduates, Geologists, Geophysicists Personal, Exploration trainee, NYSC Members, Applicants willing to work in oil & gas/Exploration firms.

Trainee Fee: # 50,000. 00
For more inquiry call: Geoken Tech (08060360538, 08028553955)
       Email: kengeotech@yahoo. com
Office: Suite 59, Sebuff Plaza, Jakande roundabout Bustop, Lekki Expressway, Lagos.  Mainland office: suit 15, kazam plaza, Ikotun.








9
WORKSHOP/SEMINAR ON PDMS APPLLICATION TO PROCESS 
                              PLANT DESIGN                                   
Geoken Tech Services Nig Ltd, a company that specializes in training and consulting on Oil and gas/Engineering Design courses.  Is coming up with a Workshop on the application of PDMS (Plant Design Management System) in Process Plant design.
Training Date: Saturday 26th May, 2018
Venue: Suite 59, Sebuff Plaza, Jakande Roundabout Lekki, Lagos
Registration Fee: #5,000
Time: 10am-4pm
Target Audience: Mechanical, Process/Chemical, industrial Engineering, NYSS Members, Fresh graduates.
Call: 08060360538, 08028553955( for details & more enquiries)
                kengeotech@yahoo. com

N/B: Subsequent workshop come up 2nd & 4th Saturday of every
         Month.

10
CAREER / SESISMIC & WELL LOGGING TRAINING IN LAGOS
« on: May 08, 2018, 04:07:30 PM »
                SEISMIC & WELL LOG INTERPRETATION (PETREL) TRAINING
                                               COURSE MODULE


office: SebuffPlaza,Suit 59, Lekki Expressway, Osapa London, Jakande
                              Roundabout       
Mainland Office: 26, Ikotun Road, College Bstop/opp Domino Pizza, Suite 15,
Kazam Plaza, Ikotun-Lagos.
                      www. geokentech. com

CALL: GEOKENTECH: (08060360538/08028553955) kengeotech@yahoo. com



?* UNDERSTANDING OF GEOLOGY OF NIGER DELTA
?* PETROLEUM SYSTEMS
?* INTERPRTATION & MANUAL CORRELATION OF LOGS (GAMMA, RESISTIVITY, DENSITY, NEUTRON)
?* SEISMIC SECTION MANUAL INTERPRATION
?* CHECK SHOT CORRELATION (OWT VS TVD)
?* FAULTS, HORIZONS PICKING MANUALY ON SEISMIC SECTION
?* MAP CREATION
? * DATA IMPORTATION (SEISMIC, WELL DATAS (WELL HEADS, LOGS) INTO
? PETREL
?* WELL LOG CORRELATION WITH PETREL: ASSIGN WELL TOPS, PICKING
? HORIZON
* LOADING OF SEISMIC DATA INTO PETREL (SEG Y DATAS)
?* PERFORMING SYNTHETIC SEISMOGRAM (SEISMIC-WELL TIE)
?* FAULT & HORIZON MAPPING
* GENERATING SURFACE MAP/ATTRIBUTE MAPS
?* PROSPECT IDENTIFICATION
? * VOLUMETRIC ANALYSIS

TARGET AUDIENCE: GEOLOGIST/GEOPHYSICIST, PET ENGINEERS/RESERVOIR
                                    ENGINEERS, WELL ENGINEERS, JOBSEEKERS, NYSC MEMBERS
?
?

Head Office: Sebuff Plaza, Suite 59.  LekkiExpressway(Jakanderoundabout)
                           By Shoprite
Mainland Office: 26, Ikotun  Road, Kazam Plaza ( Suit 15) Opp Domino Pizaa
                                 kengeotech@yahoo. com
                           www. geokentech. com

11
GEOKEN TECH SERVICES TRAINING COURSES
Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software?s, listed below are courses offer by Geoken Tech Services Nig Ltd. 
   COURSE           TARGET AUDIENCE
1    AUTOCAD (2D/3D)   Mechanical, Electrical, Material& Metallurgical Engineers/Trainee
2   PIPING DESIGN (PDMS)   Mechanical, Chemical, Process Engineers/Trainee
3   PROCESS DESIGN & OPTIMIZATION(HYSYS)   Process, Chemical Engineers/Trainee
4   RESERVOIR MODELING & WELL LOGGING(PETREL)   Geologist, Reservoir Engineers, Geophysicist, Well Engineers
Well site Geologist /Graduate trainee
5   PIPING &INSTRUMENTATION DESIGN (P&ID)   Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee
6
   
GEOPHYSICAL/GEOTECHNICAL SURVEY TRAINING   
Geologist, Geophysicist,Hydrogeologist, Civil/water engineer

COURSE MODULE( AUTOCAD 2D/3D)

Title: Engineering Design, Drafting & Modeling
Overview: the course is design for student to have in depth knowledge to Engineering design and Procurement
?   Introduction to AutoCAD 2d Toolbar
?   Application of Tools bar( draw, modify, object snap, Properties, Status, Command)
?   Setting AutoCAD drawing Limits
?   Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc
?   Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc)
?   Introduction to Isometric drawing
?   Drawing, dimensioning and editing Isometric drawing
?   Introduction to AUTOCAD 3D
?   AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style)
?   Creating solid object with AutoCAD 3d tools
?   Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools
?   Rendering of Solid objects

2.  PETREL (SEISMIC & WELL LOGGING INTERPRETATION)
   COURSE MODULE
?Basic theory of seismic reflection prospecting method in oil and gas.
  Petrel Introduction & Interface
?Different types of well logs and their uses.
?Loading of 3D seismic reflection data, making Surfaces & Horizon
Seismic Visualization & QC
?Picking of faults (Importing fault data/Fault modeling)
?Loading of well logs
Importing well heads, well deviation & well tops
?Seismic-to-well tie using synthetic seismogram
?Mapping of reservoirs tops and base
? Generation of depth structures map using check shot data.
?Calculation of petro physical parameters
?Generation of various attributes maps
?Identification of prospects.
3.  PIPING DESIGN & DRAFTING (PDMS)
COURSE MODULE:
?Introduction to Plant Equipments type
?Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler,
Fractionating columns.
?Taking coordinate/Equipments position from plant plan drawing (GAD)
?Using the Primitive method to design Equipments
?Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole)
?Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange,
Gasket) etc
?Piping Setting( Head/Tail setting)
?Pipe specification in PDMS
?Pipe Routing (Linking equipments with pipes)
?Modifying the Head/Tail of a Pipe
?Supporting Plant with Structures (Beams, Columns, Slab)
4.  PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS)
COURSE MODULE:
?Introduction to Aspen Hysys
?Hysys working Environment
?Adding component to workflow
?Adding Fluid package
?Entering Hysys Simulation Environment
?Adding material and Energy stream
?Building Simulation
?Analyze the Property Using case Study
?Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash
Separators)
?Equilibrium Reaction
?Working on Hysys Project




5.  PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID)

COURSE MODULE:
?   Introduction to P&ID workspace
?   P&ID Tools Palette
?   Creating a New P&ID Project
?   Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns,    Pumps) into P&ID Work space
?   Connecting Equipments together with Process line
?   Assigning Tags to Equipments and Specification to process lines
?   Placing control instruments to process lines, Equipments and on control valves
?   Checking for Errors by running validation

6.  GEOPHYSICAL SURVEY FOR GROUNDWATER & GEOTECHNICAL TRAINING: For Geologists, Geophysicists, and Hydrologist: This involves data Acquisition, Processing and
Interpretation using appropriate Geophysical/Geotechnical Software?s.

7:  STRCUTURAL DESIGN USING STAADPRO, ORION


Training venue/Head Office: Suite 59, Sebuff Plaza, Jakande Roundabout,
Lekki Expressway, Lagos.

Branch Office:   26, Ikotun/Idimu Rd, College Bustop, Opp Domino Pizza
Ikotun, Lagos   

Training Schedules/Dates: 1st batch of training start, Second batch (3rd ? 19th April, 2018) Second batch ( 21st April- 6th May, 2018)
kengeotech@yahoo. com
www. geokentech. com

call ( 08060360538, 08028553955) For registration details


12
         GEOPHYSICAL SURVEY FOR GROUND WATER EXPLORATION/ENGINEERING
                          STUDY/ RESERVOIR SIMULATION TRAINING (PETREL)

Geoken Tech Services Nig Ltd: A consulting firm into Geophysical/Geotechnical survey & Engineering design, is organizing a comprehensive training on the
Application of Geophysical Survey ? RESISTIVITY
SELF POTENTIAL (SP)
INDUCED POLARIZATION (IP)
For Ground water/Environmental/Engineering studies.
COURSE MODULES:
?   PRINCIPLE OF ELECTRICAL SURVEY
?   SCHLUMBEGER/WENNER/DIPOLE DIPOLE ELECTRODE CONFIGURATION
?   DATA PROCESSING/INTERPRETATION/ RESULT PRESENTATION (VES)
?   PARTIAL CURVE MATCHING TECHNIQUES
?   LAYERS CASE INTERPRETATION (3-4-5 LAYERS)- TWO LAYER MEDIUM
 THREE AND MULTIPLE LAYER MEDIUM/ INTERPRETATION (GEOELECTRIC SECTION)
?   2D RESISTIVITY DATA PROCESSING/PRESENTATION & INTERPRETATION
?   APPLICATION OF GEOPHYSICAL SOFTWARE(WINRESIST) FOR PROCESSING
( CURVE MATCHING BY COMPUTER)& GEOELECTRIC SECTIONS
?   INTERPRETATION
?   REPORT WRITING



PETREL SCHLUMBERGER (MODULES)

?* PETROLEUM SYSTEMS
?* INTERPRTATION & MANUAL CORRELATION OF LOGS (GAMMA, RESISTIVITY, DENSITY, NEUTRON)
?* SEISMIC SECTION MANUAL INTERPRATION
?* CHECK SHOT CORRELATION (OWT VS TVD)
?* FAULTS, HORIZONS PICKING MANUALY ON SEISMIC SECTION
?* MAP CREATION
? * DATA IMPORTATION (SEISMIC, WELL DATAS (WELL HEADS, LOGS) INTO
? PETREL
?* PERFORMING QA/QC ON AVAILABLE DATAS BEFORE INTERPRETATION
?* WELL LOG CORRELATION WITH PETREL: ASSIGN WELL TOPS, PICKING
? HORIZON
* LOADING OF SEISMIC DATA INTO PETREL (SEG Y DATAS)
?* PERFORMING SYNTHETIC SEISMOGRAM (SEISMIC-WELL TIE)
?* FAULT & HORIZON MAPPING
* GENERATING SURFACE MAP/ATTRIBUTE MAPS
?* PROSPECT IDENTIFICATION
? * VOLUMETRIC ANALYSIS

WHO SHOULD ATTEND: GEOLOGIST, GEOPHYSICISIST, WATER/ENVIRONMENTAL ENGINEERS, HYDROGEOLOGIST, IT STUDENTS, UNDERGRADUATES, NYSC MEMBERS/JOBSEEKERS

CALL: GEOKEN TECH (08060360538, 08028553955) FOR REGISTRATION/TRAINING ENQUIRY

Head Office: Sebuff Plaza, Suit 59.  Lekki -Expressway (Jakanderounabout) By Shoprite
                           
Mainland Office: 26, Ikotun  Road, Kazam Plaza ( Suit 15) Opp Domino Pizaa
            kengeotech@yahoo. com
            www. geokentech. com
Training Starting date: Date to be announce soon, registration is in progress


13
                   TRAINING & JOB OPPURTUNITY FOR ENGINEERS/GEOLOGISTS         
                                AJAH, LEKKI & MAINLAND       
Geoken Tech: an Engineering design firms is organizing training in the following Engineering design:
1.    AUTOCAD(2D/3D) -ENGINEERING DESIGN
2.    PDMS(PLANT DESIGN MANAGEMENT SYSTEM)
3.    PETREL(SEISMIC & WELL LOGGING INTERPRETATION)
4.    PIPING & INSTRUMENTATION DESIGN (P&ID)
5.    PROCESS DESIGN & OPTIMIZATION(ASPEN HYSYS)
6.    GEOPHYSICAL SURVEY FOR GROUNDWATER & ENGINEERING STUDY
7.    REVIT ARCHITECTURE/3D
N. B: Software?s/EBooks?, Training manual will be given to participant.
 Interested participant should send Names, Phone no, Email & software of interest to  08060360538.
Target Audience: Mechanical, Civil, Chemical, Petroleum Engineers,
                                 Jobseekers, NYSC Members, Graduates/Trainee,
                                 Geologist, IT Students, NYSC Members , Geophysicist
CONTACT: (08060360538, 08028553955)
                Email:kengeotech@yahoo. com
          www. geokentech. com
Registration in Progress: call Geoken Tech on 08060360538/08028553955
Head Office: Sebuff Plaza, Suit 59, jakande roundabout, By Shoprite, Lekki- Lagos
Oulet: 26, Ikotun/Idimu Road, Opposite Domino Pizza
Ikotun, Lagos

                                 
                                   
                         
   







14
             TRAINING & JOB OPPURTUNITY FOR ENGINEERS/GEOLOGISTS
                                   AJAH, LEKKI & MAINLAND       
GeokenTech:an Engineering design firms is organizing training in thefollowing Engineering design:
1.    AUTOCAD(2D/3D) -ENGINEERING DESIGN
2.    PDMS(PLANT DESIGN MANAGEMENT SYSTEM)
3.    PETREL(SEISMIC & WELL LOGGING INTERPRETATION)
4.    PIPING & INSTRUMENTATION DESIGN (P&ID)
5.    PROCESS DESIGN & OPTIMIZATION(ASPEN HYSYS)
6.    GEOPHYSICAL SURVEY FOR GROUNDWATER & ENGINEERING STUDY
7.    REVIT ARCHITECTURE/3D
N. B: Software?s/EBooks?, Training manual will be given to participant.
Interested participant should send Names, Phone no, Email& software ofinterest to08060360538.
Target Audience: Mechanical, Civil, Chemical, Petroleum Engineers,
                                 Jobseekers, NYSC Members, Graduates/Trainee,
                                 Geologist, IT Students, NYSC Members, Geophysicist
CONTACT: (08060360538, 08028553955)
Email:kengeotech@yahoo. com
Training kick off: Monday, 6th November, 2017.
Registration in Progress: call Geoken Tech on 08060360538/08028553955
Head Office: Sebuff Plaza, Suit 59, jakande roundabout, By Shoprite, Lekki- Lagos
Oulet: 26, Ikotun/Idimu Road, Opposite Domino Pizza
Ikotun, Lagos
















15
          INDUSTRIAL ATTACHMENT STUDENTS NEEDED
Geoken Tech Services Nig Ltd: is a Geophysical, Geotechnical/Engineering design & Procurement firm base in Lagos.  We are in need of an Industrial attachment
Students.
    REQUIREMENTS:
1.     BSC/HND IN VIEW (GEOLOGY/GEOPHYSIC OR CIVIL ENGINEERING)
2.    MUST BE RESIDING WITHIN LEKKI/AJAH AXIS
3.    SHOULD HAVE A WORKING LAPTOP
4.    MUST BE A ABLE TO PROMOTE THE SERVICES OF THE COMPANY


INTERESTED APPLICANT SHOULD SEND CV TO:    kengeotech@yahoo. com     
                                                                                      www. geokentech. com
                                                                                      info@geokentech. com
                                                             
        TEL NO:        08060360538
ADDRESS: SUITE 59, SEBUFF PLAZA, KM 15, LEKKI EPE EXPRESSWAY,
                    JAKANDE ROUNDABOUT, OSAPA, LEKKI-LAGOS.


16
                   OIL & GAS SOFTWARE  TRAINING COMING UP IN LAGOS         
                                AJAH, LEKKI & MAINLAND       
Geoken Tech: an Engineering design firms is organizing training in the following Engineering design:
1.    AUTOCAD-ENGINEERING DESIGN
2.    PDMS(PLANT DESIGN MANAGEMENT SYSTEM)
3.    PETREL(SEISMIC & WELL LOGGING INTERPRETATION)
N. B: Software?s/EBooks?, Training manual will be given to participant.
 Interested participant should send Names, Phone no, Email & software of interest to  08060360538.
Target Audience: Mechanical, Civil, Chemical, Petroleum Engineers,
                                 Jobseekers, NYSC Members, Graduates/Trainee
CONTACT: (08060360538, 08028553955)
                Email:kengeotech@yahoo. com
                                                                 
Registration in Progress: call Geoken Tech on 08060360538/08028553955

Head Office: Sebuff Plaza, Suit 59, jakande roundabout, By Shoprite, Lekki- Lagos
Oulet: 26, Ikotun/Idimu Road, Opposite Domino Pizza
Ikotun, Lagos

17
                OIL & GAS/GEOTECHNICAL TRAINING IN LAGOS
Geoken Tech is offering training on the following oil and software application:
1.    AUTOCAD (2D/3D
2.    PDMS(PLANT DESIGN MANAGEMENT SYSTEM)& P&ID
3.    HYSYS(PROCESS DESIGN & OPTIMIZATION
4.    PETREL(RESERVOIR MODELING, SEISMIC & WELL LOGGING) WINRESIST, IPI2WIN SOFTWARE TRAINING
5.    GEOTECHNICAL ENGINEERING : (SOIL INVESTIGATION METHODS PRIOR TO FOUNDATION ENGINEERING, CPT/SPT{PILING DESIGN/
6.    CONSTRUCTION & TESTING-
 

Target Audience: Mechanical, Electrical, Material/Metallurgical, Civil, Chemical Engineers, Geologist, Physicist, Petroleum Engineers.
Benefit: participate will be expose to different oil & gas/Engineering design companies for opportunities.

Interested participant should send Names, Numbers & Course of interest to
08060360538, 08028553955
Email: kengeotech@yahoo. com
Requirement:
1.    Personal Laptop , writing materials, Passport photograph



CONTACT: (08060360538, 08028553955)
 Email:kengeotech@yahoo. com
VENUE: 8, Omotayo Bello Close, Thomas Estate, Lekki/Ajah- Lagos.
     Outlet:   26, Ikotun Road, College Bustop, Kazam Plaza ( Ikotun- Lagos)


18
                    OIL & GAS/GEOTECHNICAL TRAINING IN LAGOS
Geoken Tech is offering training on the following oil and software application:
1.    AUTOCAD (2D/3D)----#30,000
2.    PDMS(PLANT DESIGN MANAGEMENT SYSTEM)& P&ID----#45,000
3.    HYSYS(PROCESS DESIGN & OPTIMIZATION)-----#30,000
4.    PETREL(RESERVOIR MODELING, SEISMIC & WELL LOGGING) WINRESIST, IPI2WIN SOFTWARE TRAINING ---#40,000
5.    GEOTECHNICAL ENGINEERING : (SOIL INVESTIGATION METHODS PRIOR TO FOUNDATION ENGINEERING, CPT/SPT{PILING DESIGN/
6.    CONSTRUCTION & TESTING----
 

Target Audience: Mechanical, Electrical, Material/Metallurgical, Civil, Chemical Engineers, Geologist, Physicist, Petroleum Engineers.
Benefit: participate will be expose to different oil & gas/Engineering design companies for opportunities.

Interested participant should send Names, Numbers & Course of interest to
08060360538, 08028553955
Training start: 3rd September, 2017
Email: kengeotech@yahoo. com
Requirement:
1.    Personal Laptop , writing materials, Passport photograph



CONTACT: (08060360538, 09084881939)
 Email:kengeotech@yahoo. com
VENUE: 8, Omotayo Bello Close, Thomas Estate, Lekki/Ajah- Lagos.
     Outlet:   26, Ikotun Road, College Bustop, Kazam Plaza ( Ikotun- Lagos)

19
MONDAY JOBS POSTING / CADD, PIPING (PDMS) & PETREL TRAINING NOW IN ABUJA
« on: August 14, 2017, 04:21:54 PM »

   OIL & GAS SOFTWARE APPLICATION TRAINING COMING UP IN ABUJA
Geoken Tech in collaboration with Ciel Consulting is organizing training in the following Engineering design:
1.    AUTOCAD (2D/3D)
2.    PDMS(PLANT DESIGN MANAGEMENT SYSTEM) & P&ID
3.    PETREL( SEISMIC & WELL LOGGING )
N. B: Software?s/EBooks?, Training manual will be given to participant.
 Interested participant should send Names, Phone no, Email & software of interest to  08060360538.
Target Audience: Mechanical, Civil, Chemical, Petroleum Engineers, Geologist, Geophysicist, Jobseekers, NYSC Members, Graduates trainee.
                                 
CONTACT: (08060360538, 08028553955)
                Email:kengeotech@yahoo. com
DATE:    Training Start on 25th September, 2017
                   Registration in Progress
                                                                 
Training Centre:  Ciel Consulting/Geoken Tech
                             House 67 Kano Street Area 1, Garki, Abuja
                            After Shehu Shagari Mosque, Inside Federal Housing
                           Special guest house, Abuja.     

20
CAREER / BASIC OIL & GAS/ENGINEERING DESIGN TRAINING IN LAGOS
« on: August 10, 2017, 02:19:42 PM »
                    OIL & GAS/GEOTECHNICAL TRAINING IN LAGOS
Geoken Tech is offering training on the following oil and software application:
1.    AUTOCAD (2D/3D)----#30,000
2.    PDMS(PLANT DESIGN MANAGEMENT SYSTEM)& P&ID----#45,000
3.    HYSYS(PROCESS DESIGN & OPTIMIZATION)-----#30,000
4.    PETREL(RESERVOIR MODELING, SEISMIC & WELL LOGGING) WINRESIST, IPI2WIN SOFTWARE TRAINING ---#40,000
5.    GEOTECHNICAL ENGINEERING : (SOIL INVESTIGATION METHODS PRIOR TO FOUNDATION ENGINEERING, CPT/SPT{PILING DESIGN/
6.    CONSTRUCTION & TESTING----
 

Target Audience: Mechanical, Electrical, Material/Metallurgical, Civil, Chemical Engineers, Geologist, Physicist, Petroleum Engineers.
Benefit: participate will be expose to different oil & gas/Engineering design companies for opportunities.

Interested participant should send Names, Numbers & Course of interest to
08060360538, 08028553955
Email: kengeotech@yahoo. com
Courses 1-4 start on 14th  August, 2017
Requirement:
1.    Personal Laptop , writing materials, Passport photograph



CONTACT: (08060360538, 09084881939)
 Email:kengeotech@yahoo. com
VENUE: 8, Omotayo Bello Close, Thomas Estate, Lekki/Ajah- Lagos.
     Outlet:   26, Ikotun Road, College Bustop, Kazam Plaza ( Ikotun- Lagos)





21
FRIDAY JOBS / OIL & GAS TRAINING ( CAD, PDMS, PETREL ) IN LAGOS
« on: July 20, 2017, 02:25:47 PM »
Geoken Tech Services Nig Ltd  hereby submit proposal for training graduate Engineers, Pure and applied science personal in your organization in the following Oil/gas & Engineering design software application, AutoCAD, PDMS, HYSYS, P&ID, PETREL.

Courses/Area of Interest
   COURSE           TARGET AUDIENCE
1    AUTOCAD (2D/3D)   MECHANICAL, ELECTRICAL, MATERIAL & METTALLURGICAL ENGINEERS/TRAINEE
2   PIPING DESIGN (PDMS)   MECHANICAL, CHEMICAL, PROCESS ENGINEERS/TRAINEES
3   PROCESS DESIGN & OPTIMIZATION(HYSYS)   PROCESS, CHEMICAL ENGINEERS/TRAINEES
4   RESERVOIR MODELING & WELL LOGGING(PETREL)   GEOLOGIST, RESERVOIR ENGINEERS, GEOPHYSICIST,
WELLSITE GEOLOGIST/GRADUATE TRAINEES

5   PIPING &INSTRUMENTATION DESIGN (P&ID)   MECHANICAL, PROCESS, ELECTRICAL/INSTRUMENTAION ENGINEERS/GRADUATE TRAINEE

Contact: Geoken Tech: 08060360538 (kengeotech@yahoo. com)

22
      OIL & GAS SOFTWARE APPLICATION TRAINING IN IKEJA(JULY BATCH)
Geoken Tech is organizing training in the following Engineering design, Piping &
Reservoir Simulation software:
1.    AUTOCAD ? All field of Engineering/Sciences
2.    PDMS(PLANT DESIGN MANAGEMENT SYSTEM) ? for Mechanical, Chemical,  Material/Metallurgical graduates,
3.    PETREL(SEISMIC & WELL LOGGING)-for Geologist, Petroleum Engineers graduates/Nysc  Members
N. B: Software?s/EBooks?, Training manual will be given to participant.
 Interested participant should send Names, Phone no, Email & software of interest to  08060360538.
Target Audience: Mechanical, Civil, Chemical, Petroleum Engineers,
                                Geologist, Jobseekers, NYSC Members,
CONTACT:   (08060360538, 08028553955)
                      Email:kengeotech@yahoo. com
DATE:         24th - 28th July, 2017
Fee: #30,000 per course, candidate enrolling for two courses
         Are to pay #50,000
                                                                 
Training Centre/Venue: Glass House (1, ADEGBEYEM STREET, OFF ALLEN
                                                                AVENUE, BEHIND ALADE MARKET,
                                                                            IKEJA, LAGOS.

23
CAREER / OIL/GAS TRAINING 4 GEOLOGIST, ENGINEEERS, JOBSEEKERS
« on: June 16, 2017, 04:30:46 PM »
Geoken Tech Services Nig Limited:  is an incorporated company, that is into training of relevant oil/gas, Engineering design software?s.  Below are following courses in which we train.

Course Specification:                                         
   COURSE           TARGET AUDIENCE
1    AUTOCAD (2D/3D)   Mechanical, Electrical, Material & Metallurgical Engineers/Trainee, NYSC Members, Jobseekers
2   PIPING DESIGN (PDMS)   Mechanical, Chemical, Process Engineers/Trainee, NYSC Members, Jobseekers
3   PROCESS DESIGN & OPTIMIZATION(HYSYS)   Process, Chemical Engineers/Trainee Engineers, Jobseekers
4   RESERVOIR MODELING & WELL LOGGING(PETREL)   Geologist, Reservoir Engineers, Geophysicist, Well Engineers
Well site Geologist /Graduate trainee
5   PIPING &INSTRUMENTATION DESIGN (P&ID)   Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee

 COURSE MODULES ( AUTOCAD 2D/3D)


Title: Engineering Design, Drafting & Modeling
Overview: the course is design for student to have in depth knowledge to Engineering design and Procurement
?   Introduction to AutoCAD 2d Toolbar
?   Application of Tools bar( draw, modify, object snap, Properties, Status, Command)
?   Setting AutoCAD drawing Limits
?   Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc
?   Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc)
?   Introduction to Isometric drawing
?   Drawing, dimensioning and editing Isometric drawing
?   Introduction to AUTOCAD 3D
?   AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style)
?   Creating solid object with AutoCAD 3d tools
?   Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools
?   Rendering of Solid objects





FIG 1: AUTOCAD DRAFTING & DESIGN





 
                                FIG 2: 3D MODELING

2.  PETREL (SEISMIC & WELL LOGGING INTERPRETATION)
 COURSE MODULES
?Basic theory of seismic reflection prospecting method in oil and gas.
  Petrel Introduction & Interface


?Different types of well logs and their uses.
?Loading of 3D seismic reflection data, making Surfaces & Horizon
Seismic Visualization & QC
?Picking of faults (Importing fault data/Fault modeling)
?Loading of well logs

Importing well heads, well deviation & well tops
?Seismic-to-well tie using synthetic seismogram
?Mapping of reservoirs tops and base
? Generation of depth structures map using check shot data.
?Calculation of petro physical parameters
?Generation of various attributes maps
?Identification of prospects.
 

FIG 3: WELL CORRELATION, SEISMIC WELL TIE WITH PETREL

3.  PIPING DESIGN & DRAFTING (PDMS)
    COURSE MODULE:
?Introduction to Plant Equipments type
?Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler,
Fractionating columns.
?Taking coordinate/Equipments position from plant plan drawing (GAD)
?Using the Primitive method to design Equipments
?Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole)
?Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange,
Gasket) etc
?Piping Setting
?Pipe specification in PDMS
?Pipe Routing (Linking equipments with pipes)
?Modifying the Head/Tail of a Pipe
?Supporting Plant with Structures (Beams, Columns, Slab)
 

FIG 4: EQUIPMENT DESIGN & PIPE ROUTING WITH PDMS
4.  PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS)
     COURSE MODULE:
 ?Introduction to Aspen Hysys
?Hysys working Environment
?Adding component to workflow
?Adding Fluid package
?Entering Hysys Simulation Environment
?Adding material and Energy stream
?Building Simulation
?Analyze the Property Using case Study
?Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash
Separators)
?Equilibrium Reaction
?Working on Hysys Project

5.  PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID)
   
    COURSE MODULE:
?   Introduction to P&ID workspace
?   P&ID Tools Palette
?   Creating a New P&ID Project
?   Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns,    Pumps) into P&ID Work space
?   Connecting Equipments together with Process line
?   Assigning Tags to Equipments and Specification to process lines
?   Placing control instruments to process lines, Equipments and on control valves
?   Checking for Errors by running validation

 

     FIG 5: PIPING & INSTRUMNETATION DETAILS OF FLOW LINES,
                 CONTROL INSTRUMENTS

For Enquiry, Contact: Geoken Tech Services Nig Ltd
                                 08060360538, 08028553955
                         Email:       kengeotech@yahoo. com

?   Training Manuals & Certificate of Completion will be issue

Training Calender:
AUTOCAD & PDMS: ( 19th - 24TH june, 2017)
PETREL ( SEISMIC & WELL LOGGING) ( 26TH ?30th June2017)

TRAINING CENTRES: 8, OMOTAYO BELLO CLOSE, THOMAS
                                                   ESTATE, AJAH-LAGOS( ALONG ABRAHAM
                                                  ADESANYA RD)
OUTLET( CENTRE 2):     26, IKOTUN RD, SUIT 15, KAZAM PLAZA, OPP
                                                  DOMINO PIZZA

24
CAREER / TRAINING FOR JOBSEEKERS, GRADUATE ENGINEERS, NYSC MEMBERS
« on: June 03, 2017, 04:03:27 PM »
Geoken Tech Services Nig Limited:  is an incorporated company, that is into training of relevant oil/gas, Engineering design software?s.  Below are following courses in which we train.

Course Specification:                                         
   COURSE           TARGET AUDIENCE
1    AUTOCAD (2D/3D)   Mechanical, Electrical, Material & Metallurgical Engineers/Trainee, NYSC Members, Jobseekers
2   PIPING DESIGN (PDMS)   Mechanical, Chemical, Process Engineers/Trainee, NYSC Members, Jobseekers
3   PROCESS DESIGN & OPTIMIZATION(HYSYS)   Process, Chemical Engineers/Trainee Engineers, Jobseekers
4   RESERVOIR MODELING & WELL LOGGING(PETREL)   Geologist, Reservoir Engineers, Geophysicist, Well Engineers
Well site Geologist /Graduate trainee
5   PIPING &INSTRUMENTATION DESIGN (P&ID)   Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee

 COURSE MODULES ( AUTOCAD 2D/3D)


Title: Engineering Design, Drafting & Modeling
Overview: the course is design for student to have in depth knowledge to Engineering design and Procurement
?   Introduction to AutoCAD 2d Toolbar
?   Application of Tools bar( draw, modify, object snap, Properties, Status, Command)
?   Setting AutoCAD drawing Limits
?   Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc
?   Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc)
?   Introduction to Isometric drawing
?   Drawing, dimensioning and editing Isometric drawing
?   Introduction to AUTOCAD 3D
?   AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style)
?   Creating solid object with AutoCAD 3d tools
?   Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools
?   Rendering of Solid objects





FIG 1: AUTOCAD DRAFTING & DESIGN





 
                                FIG 2: 3D MODELING

2.  PETREL (SEISMIC & WELL LOGGING INTERPRETATION)
 COURSE MODULES
?Basic theory of seismic reflection prospecting method in oil and gas.
  Petrel Introduction & Interface


?Different types of well logs and their uses.
?Loading of 3D seismic reflection data, making Surfaces & Horizon
Seismic Visualization & QC
?Picking of faults (Importing fault data/Fault modeling)
?Loading of well logs

Importing well heads, well deviation & well tops
?Seismic-to-well tie using synthetic seismogram
?Mapping of reservoirs tops and base
? Generation of depth structures map using check shot data.
?Calculation of petro physical parameters
?Generation of various attributes maps
?Identification of prospects.
 

FIG 3: WELL CORRELATION, SEISMIC WELL TIE WITH PETREL

3.  PIPING DESIGN & DRAFTING (PDMS)
    COURSE MODULE:
?Introduction to Plant Equipments type
?Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler,
Fractionating columns.
?Taking coordinate/Equipments position from plant plan drawing (GAD)
?Using the Primitive method to design Equipments
?Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole)
?Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange,
Gasket) etc
?Piping Setting
?Pipe specification in PDMS
?Pipe Routing (Linking equipments with pipes)
?Modifying the Head/Tail of a Pipe
?Supporting Plant with Structures (Beams, Columns, Slab)
 

FIG 4: EQUIPMENT DESIGN & PIPE ROUTING WITH PDMS
4.  PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS)
     COURSE MODULE:
 ?Introduction to Aspen Hysys
?Hysys working Environment
?Adding component to workflow
?Adding Fluid package
?Entering Hysys Simulation Environment
?Adding material and Energy stream
?Building Simulation
?Analyze the Property Using case Study
?Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash
Separators)
?Equilibrium Reaction
?Working on Hysys Project

5.  PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID)
   
    COURSE MODULE:
?   Introduction to P&ID workspace
?   P&ID Tools Palette
?   Creating a New P&ID Project
?   Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns,    Pumps) into P&ID Work space
?   Connecting Equipments together with Process line
?   Assigning Tags to Equipments and Specification to process lines
?   Placing control instruments to process lines, Equipments and on control valves
?   Checking for Errors by running validation

 

     FIG 5: PIPING & INSTRUMNETATION DETAILS OF FLOW LINES,
                 CONTROL INSTRUMENTS

For Enquiry, Contact: Geoken Tech Services Nig Ltd
                                 08060360538, 08028553955
                         Email:       kengeotech@yahoo. com

?   Training Manuals & Certificate of Completion will be issue


TRAINING CENTRES: 8, OMOTAYO BELLO CLOSE, THOMAS
                                                   ESTATE, AJAH-LAGOS( ALONG ABRAHAM
                                                  ADESANYA RD)
OUTLET( CENTRE 2):     26, IKOTUN RD, SUIT 15, KAZAM PLAZA, OPP
                                                  DOMINO PIZZA

25
 
Geoken Tech offering subsidized Geoscience Training on Seismic and Petrophysical interpretation using PETREL

Venue: 8, Omotayo Bello Close, Thomas Estate ?Ajah, Lagos State.
                                               OR
             26, Ikotun Rd, College Bustop, Suite 15, Kazam Plaza.

COURSE MODULES
?Basic theory of seismic reflection prospecting method in oil and gas.
  Petrel Introduction & Interface


?Different types of well logs and their uses.
?Loading of 3D seismic reflection data, making Surfaces & Horizon
Seismic Visualization & QC
?Picking of faults (Importing fault data/Fault modeling)
?Loading of well logs
Importing well heads, well deviation & well tops
?Seismic-to-well tie using synthetic seismogram
?Mapping of reservoirs tops and base
? Generation of depth structures map using checkshot data.
?Calculation of petrophysical parameters
?Generation of various attributes maps
?Identification of prospects.




Time: 10am-2pm daily

NB: The softwares shall be installed during the training for all participants.

Cost: #40,000

For registration and enquiry contact
08060360538
Wassap ( 08060360538)   

Pages: [1] 2 3 4

Enter Your Email Below For Daily Jobs Updates, It's Free

100% Free